PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN D11T TRACK-TYPE TRACTORS, 777F, AND 777G OFF-HIGHWAY TRUCKS, 854K WHEEL DOZERS, 992K, AND 993K WHEEL LOADERS Caterpillar

PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN D11T TRACK-TYPE TRACTORS, 777F, AND 777G OFF-HIGHWAY TRUCKS, 854K WHEEL DOZERS, 992K, AND 993K WHEEL LOADERS

Usage:

TEBE7672-02

Show/hide table

24Jul2018

(Revised 23May2019)

U-434

A-319

D-380

O-387

Show/hide table

After Failure Only	PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN D11T TRACK-TYPE TRACTORS, 777F, AND 777G OFF-HIGHWAY TRUCKS, 854K WHEEL DOZERS, 992K, AND 993K WHEEL LOADERS
1216 1201 1000 7555		PS53825

Show/hide table

NOTE:	Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
NOTE:	This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53825" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.

Show/hide table

NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

Show/hide table


NOTE:	This Revised Service Letter replaces the 24Jul2018 (Revised 11Sep2018) Service Letter. Changes have been made to the Affected Product.

Show/hide table

TERMINATION DATE

31Jul2020

PROBLEM

Show/hide table

The existing 516-9693 Cylinder Liners can crack in the bottom o-ring grooves on certain D11T Track-Type Tractors, 777F, and 777G Off-Highway Trucks, 854K Wheel Dozers, 992K, and 993K Wheel Loaders. If the existing liner cracks it will allow oil and coolant mixing.

AFFECTED PRODUCT

Show/hide table

Model	Identification Number
*****Group 1*****
D11T	AMA00712-00767 MDG00188-00193

Show/hide table

*****Group 2*****
854K	RM300253-00254 RM600252-00257, 260
992K	RM200162, 164-165, 167-169, 171-172 RM500151-00153, 155-163, 165-166, 168, 173, 175, 177, 183, 188, 204
993K	Z8Z00151-00152
993K 2	Z4Z00707-00709

Show/hide table

*****Group 3*****
777G	GT700181, 190 TNM01039-01043, 1045, 1047, 1050-1081, 1083-1085, 1088-1089, 1091-1112, 1114, 1119, 1122, 1146, 1150, 1158
777G OEM	T4Y00503-00508, 510-514, 516, 518, 521-523, 525-526, 532-533

PARTS NEEDED

Show/hide table

Qty	Part Number	Description
*****Group 1*****
2	1R1808	FILTER-LUBE
4	5E8771	SEAL-O-RING
3	5P0537	WASHER-HARD
3	5P8068	SEAL-O-RING
4	5P8356	SEAL-O-RING
1	8C3089	SEAL-O-RING
1	8J4351	SEAL-O-RING
1	8N0422	GASKET-O PAN RR
12	8S9191	BOLT
12	9L5854	BAND-FILLER
12	9X7317	SEAL-FUEL SYSTEM
6	0315085	BOLT-LOCKING
2	1075769	SEAL-O-RING
1	1121102	SEAL-O-RING
1	1121574	SEAL-O-RING
1	1123259	SEAL-O RING
4	1178801	SEAL-O-RING
12	1550809	SEAL-LINER
12	1550810	SEAL-LINER
12	1552793	SEAL-LINER
2	1978418	GASKET
2	1978419	GASKET
12	2239159	RING-PISTON
2	2253099	GASKET-CYL HEAD
2	2265613	GASKET
12	2303728	SEAL-FUEL SYSTEM
12	2303775	SEAL-FUEL SYSTEM
12	2323226	BEARING-ROD
2	2391139	SEAL
12	2391388	GASKET
12	2465659	RING-PISTON-OIL
4	3419211	GASKET
12	3445153	RING-PISTON
2	3499659	GASKET
1	3531648	GASKET-OIL PAN
2	3548484	GASKET-PLATE
48	3591439	SEAL AS-WATER
12	5560701	LINER-CYLINDER
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 5% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
*****Group 2*****
2	1R1808	FILTER-LUBE
1	3P0650	SEAL-O RING
2	5D5958	SEAL-O-RING
4	5E8771	SEAL-O-RING
3	5P0537	WASHER-HARD
1	5P8068	SEAL-O-RING
4	5P8356	SEAL-O-RING
2	5P8429	SEAL-O-RING
1	8C3089	SEAL-O-RING
12	8S9191	BOLT
12	9L5854	BAND-FILLER
12	9X7317	SEAL-FUEL SYSTEM
6	0315085	BOLT-LOCKING
2	1075769	SEAL-O-RING
1	1121102	SEAL-O-RING
1	1121574	SEAL-O-RING
1	1123259	SEAL-O RING
2	1178801	SEAL-O-RING
12	1550809	SEAL-LINER
12	1550810	SEAL-LINER
12	1552793	SEAL-LINER
2	1978418	GASKET
2	1978419	GASKET
12	2239159	RING-PISTON
2	2253099	GASKET-CYL HEAD
2	2265613	GASKET
12	2303728	SEAL-FUEL SYSTEM
12	2303775	SEAL-FUEL SYSTEM
12	2323226	BEARING-ROD
2	2391139	SEAL
12	2391388	GASKET
12	2465659	RING-PISTON-OIL
12	3445153	RING-PISTON
2	3499659	GASKET
1	3531648	GASKET-OIL PAN
2	3548484	GASKET-PLATE
48	3591439	SEAL AS-WATER
12	5560701	LINER-CYLINDER
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 5% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
*****Group 3*****
2	1R1808	FILTER-LUBE
1	3P0650	SEAL-O RING
2	5D5958	SEAL-O-RING
4	5E8771	SEAL-O-RING
3	5P0537	WASHER-HARD
1	5P8068	SEAL-O-RING
4	5P8356	SEAL-O-RING
2	5P8429	SEAL-O-RING
1	8C3089	SEAL-O-RING
12	8S9191	BOLT
12	9L5854	BAND-FILLER
12	9X7317	SEAL-FUEL SYSTEM
6	0315085	BOLT-LOCKING
2	1075769	SEAL-O-RING
1	1121102	SEAL-O-RING
1	1121574	SEAL-O-RING
1	1123259	SEAL-O RING
2	1178801	SEAL-O-RING
12	1550809	SEAL-LINER
12	1550810	SEAL-LINER
12	1552793	SEAL-LINER
2	1978418	GASKET
2	1978419	GASKET
12	2239159	RING-PISTON
2	2253099	GASKET-CYL HEAD
2	2265613	GASKET
12	2303728	SEAL-FUEL SYSTEM
12	2303775	SEAL-FUEL SYSTEM
12	2323226	BEARING-ROD
2	2391139	SEAL
12	2391388	GASKET
12	2465659	RING-PISTON-OIL
12	3445153	RING-PISTON
2	3499659	GASKET
1	3531648	GASKET-OIL PAN
2	3548484	GASKET-PLATE
48	3591439	SEAL AS-WATER
12	5560701	LINER-CYLINDER
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 5% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.

ACTION REQUIRED

Show/hide table

If the mixing of oil and coolant has occurred ensure that all appropriate trouble shooting is completed before removal of the liners for inspection.

If cracked liner is identified refer to the appropriate Disassembly and Assembly manual for repair.

NOTE: Date code of failed liner must be entered into warranty claim. Date Code is locate on bottom of liner, on rim.

NOTE: An AFA will be required for warranty claim if failure is beyond
oil and coolant mixing.

If cooling system has been contaminated , follow the guidelines for cleaning the cooling system with a non-foaming dish detergent within SEBU6250, "Conventional Coolant/Antifreeze Cooling System Maintenance". Refer to appropriate OM&M / Special instructions for proper coolant fill procedure.

Show/hide table

SERVICE CLAIM ALLOWANCES

Show/hide table

Product smu/age whichever comes first	Caterpillar		Dealer Suggested		Customer Suggested
Product smu/age whichever comes first	Parts %	Labor Hrs%	Parts %	Labor Hrs%	Parts %	Labor Hrs%
*****Group 1*****
0-7500 hrs, 0-48 mo	100.0%	100.0%	0.0%	0.0%	0.0%	0.0%
7501-11000 hrs, 49-60 mo	53.0%	50.0%	0.0%	0.0%	35.0%	50.0%
11001-15000 hrs, 61-65 mo	27.0%	25.0%	0.0%	0.0%	55.0%	75.0%

NOTE: This is a 162.0-hour job for Group 1
This is a 162 hour job: 120 hours to Remove and Install engine. 42 hours to rework engine. To include all related tasks including but not limited to: - Disconnect and connect - Disassembly - Cleaning - Reassembly - Testing of the repair NOTE: Due to the nature of this program additional Caterpillar parts that require replacement during the mechanical disassembly and assembly on the mid frame section may be claimed as required. These parts are limited to seals, gaskets, bolts, washers, nuts, locknuts, rings, clips, and clamps.

Show/hide table

Product smu/age whichever comes first	Caterpillar		Dealer Suggested		Customer Suggested
Product smu/age whichever comes first	Parts %	Labor Hrs%	Parts %	Labor Hrs%	Parts %	Labor Hrs%
*****Group 2*****
0-7500 hrs, 0-48 mo	100.0%	100.0%	0.0%	0.0%	0.0%	0.0%
7501-11000 hrs, 49-60 mo	53.0%	50.0%	0.0%	0.0%	35.0%	50.0%
11001-15000 hrs, 61-65 mo	27.0%	25.0%	0.0%	0.0%	55.0%	75.0%

NOTE: This is a 122.0-hour job for Group 2
This is a 122 hour job: 80 hours to Remove and Install engine. 42 hours to rework engine. To include all related tasks including but not limited to: - Disconnect and connect - Disassembly - Cleaning - Reassembly - Testing of the repair NOTE: Due to the nature of this program additional Caterpillar parts that require replacement during the mechanical disassembly and assembly on the mid frame section may be claimed as required. These parts are limited to seals, gaskets, bolts, washers, nuts, locknuts, rings, clips, and clamps.

Show/hide table

Product smu/age whichever comes first	Caterpillar		Dealer Suggested		Customer Suggested
Product smu/age whichever comes first	Parts %	Labor Hrs%	Parts %	Labor Hrs%	Parts %	Labor Hrs%
*****Group 3*****
0-7500 hrs, 0-48 mo	100.0%	100.0%	0.0%	0.0%	0.0%	0.0%
7501-11000 hrs, 49-60 mo	53.0%	50.0%	0.0%	0.0%	35.0%	50.0%
11001-15000 hrs, 61-65 mo	27.0%	25.0%	0.0%	0.0%	55.0%	75.0%

NOTE: This is a 122.0-hour job for Group 3
This is a 122 hour job: 80 hours to Remove and Install engine. 42 hours to rework engine. To include all related tasks including but not limited to: - Disconnect and connect - Disassembly - Cleaning - Reassembly - Testing of the repair NOTE: Due to the nature of this program additional Caterpillar parts that require replacement during the mechanical disassembly and assembly on the mid frame section may be claimed as required. These parts are limited to seals, gaskets, bolts, washers, nuts, locknuts, rings, clips, and clamps.