Before/After
| PRODUCT SUPPORT PROGRAM FOR INSPECTING THE FRAME PLATES ON CERTAIN HF201B FELLING HEADS |
6319
|
PS45518 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program must be administered either before or after failure.
In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS45518" as the Part Number
and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.
If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
The existing frame plates may be warped on certain HF201B Felling Heads. If the existing plates are warped, early pin bore wear may occur. |
No parts needed for this program |
Refer to M0084421, Special Instruction, "Rework Procedure for the Grab Arm and the Collector Arm Pin Bores Alignment on Certain HF201B Felling Heads", for additional information to measure the frame plates. Only rework the plates if the plates are warped beyond what is specified in the Special Instruction. |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-2000 hrs, 0-12 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
NOTE: This is a 1.0-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|