PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRAVEL PEDAL GROUP ON CERTAIN M314F, M315F, M316F, M317F, M318F, M320F, M322F, MH3022, AND MH3024 WHEELED EXCAVATORS Caterpillar

PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRAVEL PEDAL GROUP ON CERTAIN M314F, M315F, M316F, M317F, M318F, M320F, M322F, MH3022, AND MH3024 WHEELED EXCAVATORS

Usage:

TEBE6406-01

Show/hide table

30Aug2017

(Revised 18May2018)

U-452

A-314

D-372

O-377

Show/hide table

After Failure Only	PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRAVEL PEDAL GROUP ON CERTAIN M314F, M315F, M316F, M317F, M318F, M320F, M322F, MH3022, AND MH3024 WHEELED EXCAVATORS
5059 5063		PS53559

Show/hide table

NOTE:	Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
NOTE:	This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53559" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.

Show/hide table

NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

Show/hide table


NOTE:	This Revised Service Letter replaces the 30Aug2017 Service Letter. Changes have been made to the Affected Product, Parts Needed, and Action Required.

Show/hide table

TERMINATION DATE

31Aug2019

PROBLEM

Show/hide table

The existing travel pedal group can fail on certain M314F, M315F, M316F, M317F, M318F, M320F, M322F, MH3022, and MH3024 Wheeled Excavators. If the existing travel pedal group fails, it can reduce travel speed or become unable to travel. Active Fault Code 2142: Straight travel pedal position sensor.

AFFECTED PRODUCT

Show/hide table

Model	Identification Number
M314F	F4A00253-00663 FB400222-00384
M315F	F4D00200-00347
M316F	F6N00109-00303 FB600168-00261
M316F OEM	CP500101-00106
M317F	F6P00298-00378
M318F	F8B00287-00944, 946-1069
M318F OEM	MH900101-00104, 90105
M320F	F2W00169-00524 FB200281-00341
M322F	F2Z00144-00220 FBW00117-00154
MH3022	FB300164-00270 FM200276-00538
MH3024	FB500137-00184 FM400111-00113, 115-142, 144-157, 159-211

PARTS NEEDED

Show/hide table

Qty	Part Number	Description
1	5127092	PEDAL GP-TRAVEL
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 2% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.

ACTION REQUIRED

Show/hide table

Replace the existing travel pedal group with a new 512-7092 Travel Pedal Group.

Refer to UENR6142, Disassembly and Assembly, for the rework instructions.

Note: Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. Refer to the Operation and Maintenance Manual "Safety Section".

Show/hide table

SERVICE CLAIM ALLOWANCES

Show/hide table

Product smu/age whichever comes first	Caterpillar		Dealer Suggested		Customer Suggested
Product smu/age whichever comes first	Parts %	Labor Hrs%	Parts %	Labor Hrs%	Parts %	Labor Hrs%
0-3000 hrs, 0-36 mo	100.0%	100.0%	0.0%	0.0%	0.0%	0.0%