1U-9054 Driver Lifter Removes And Installs Rear Drive Wheel Assembly Using Overhead Lifting Equipment{4199,0729}
Usage:
Challenger 35, Challenger 45, Challenger 55 Agricultural Tractors
Reference: Service Manual Module; SENR8300; Challenger 35, 45 and 55 Agricultural Tractors.
Warranty: G
Features/Benefits
-
- * Used to lift and move rear drive wheel during assembly and disassembly of track system (track belt must first be removed)
- * Used with overhead lifting equipment
- * Designed to hold drive wheel in horizontal position for easier installation (attaches easily and quickly)
- * Sliding clamp assembly traps drive wheel in place during removal and installation (virtually eliminates possibility of slippage)
- * Designed to reach around fender of Challenger to remove rear drive wheel assembly (eliminates unnecessary disassembly of Challenger)
- * Tested and approved at twice the working load limit
- * Used to lift and move rear drive wheel during assembly and disassembly of track system (track belt must first be removed)
Specifications/Technical Information
- Overall size - 685 x 826 mm (27.0 x 32.5 inch)
- Inside diameter of lifting eye - 76 mm (3.0 inch)
- Maximum lifting capacity - 908 kg (2000 lb)
- Inside diameter of lifting eye - 76 mm (3.0 inch)
Caterpillar Information System:
1997/01/13 Use 1U-9097 Wrench To Remove And Install Accumulator In Mobile-Trac Tensioning System{4197,0756}
1997/01/13 1U-9055 Idler Lifter Removes And Installs Front Idler Assembly Using Overhead Lifting Equipment{4150,0729}
1997/01/13 1U-6130 Guide Stud, 1U-9785 Guide Stud And 1U-9817 Guide Stud Makes Undercarriage Installation And Removal Much Easier And More Efficient{4150,0729}
1997/01/13 1U-9095 Lifter Group Allows Complete Undercarriage To Be Moved With Fork Lift Or Farm Tractor{4150,0632}
1996/12/30 Flywheel Housing To Cylinder Block Joint Improvements {1157,1201}
1996/12/30 Improved Boom Electrical Harness Routing For Increased Reliability {1408}
1996/12/30 Supplement To Operation And Maintenance Manual; "Dual Position Switch To Operate The Tilt Kickout System" {1435,7451}
1996/12/30 Procedure For Aligning Front Suspension Frame Group With Output Transfer Gearbox {7200}
1996/12/30 New Hydraulic Pump Group Increases Service Life {5070}
1996/12/30 Improved Seals And Bearings Used To Reduce Seal Leaks In Output Transfer Gear Groups {3159,3003}
1996/12/30 Seal Improvement Prevents Leakage In Hook Winch Groups {5417}
1996/12/30 3054 Engine - New Rear Crankshaft Oil Seal Housing Provides Better Seal {1161}
1997/01/13 1U-9058 Hose Group Provides All Necessary Equipment For Adjusting And Releasing Tension On Mobile-Trac Belts{4197,0766}
1997/01/13 Use 125-4634 Spanner Wrench Assembly To Remove And Install 110-5425 Nut Retaining Axle Shaft Into Housing{3250,0727}
1997/01/13 Spanner Wrenches And Related Tools To Remove And Install Final Drive Bearing Locknut{4050,0602}
1997/01/13 Use 126-6611 Seal Driver To Install Outboard Oil Seal On Eccentric Group{6605,6606,0727}
1997/01/13 129-7142 Lifting Beam Simplifies Removal And Installation Of Friction Group{6605,0632,0717}
1997/01/13 Fixture Assembly Allows More Accurate Levelling Of Screed Plates{6643,0764}
1997/01/13 More Collets Now Available For XT5 And XT6 Hoses Using 4C-9480 Hose Tooling Group{0684}
1997/01/13 Use 126-1023 Stem Pusher For Sleeve And Coupling Removal On Hose Assemblies{5057,0684}
1997/01/13 Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13 Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13 Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/20 Cab Rear Window Improvements Provide Improved Sealing And Visibility {7301,7310}