Quickly And Accurately Set Valve Lash{1105,0766}
Usage:
3500, 3500B Engines
Reference: Special Instruction; SEHS9261; Installation Of 4C-8246 Dial Indicator To 4C-8242 Gauge.
Warranty: G
Features/Benefits
-
- * Replaces cancelled 4C-8241 Valve Lash Setting Gauge
- * Used to provide quick, accurate valve lash settings on all 3500 Engines
- * Dial indicator eliminates guesswork by measuring exact valve gap (greatly reduces time needed to accurately adjust valves)
- * Base assembly has an inner and outer sleeve: inner sleeve puts tension on rocker arm; outer sleeve puts pressure, in opposite direction, on valve bridge assembly; dial indicator measures gap to determine exact valve setting
- * Replaces cancelled 4C-8241 Valve Lash Setting Gauge
Specifications/Technical Information
- Indicator diameter - 57 mm (2.25 inch)
- Graduations - (.001 inch)
- Dial reading - 0-50-0
- Range - (.250 inch); Total - (.100 inch) per revolution
- Graduations - (.001 inch)
Assembled Valve Lash Setting Tool
(1) 125-2742 Base Assembly [for 3500]. (1) 125-2744 Base Assembly [for 3500B, not shown]. (2) 6V-2057 Contact Point [part of 125-2743]. (3) 125-2743 Collar Group. (4) 4C-8246 Indicator. (5) 9U-6272 Nylon Screw [part of 125-2743]. Not shown: 6V-2030 Indicator Extension [part of 125-2743].
Caterpillar Information System:
1997/01/13 Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13 Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13 Use 126-1023 Stem Pusher For Sleeve And Coupling Removal On Hose Assemblies{5057,0684}
1997/01/13 More Collets Now Available For XT5 And XT6 Hoses Using 4C-9480 Hose Tooling Group{0684}
1997/01/13 Fixture Assembly Allows More Accurate Levelling Of Screed Plates{6643,0764}
1997/01/13 129-7142 Lifting Beam Simplifies Removal And Installation Of Friction Group{6605,0632,0717}
1997/01/13 Use 126-6611 Seal Driver To Install Outboard Oil Seal On Eccentric Group{6605,6606,0727}
1997/01/13 Spanner Wrenches And Related Tools To Remove And Install Final Drive Bearing Locknut{4050,0602}
1997/01/13 Use 125-4634 Spanner Wrench Assembly To Remove And Install 110-5425 Nut Retaining Axle Shaft Into Housing{3250,0727}
1997/01/13 1U-9058 Hose Group Provides All Necessary Equipment For Adjusting And Releasing Tension On Mobile-Trac Belts{4197,0766}
1997/01/13 1U-9054 Driver Lifter Removes And Installs Rear Drive Wheel Assembly Using Overhead Lifting Equipment{4199,0729}
1997/01/13 Use 1U-9097 Wrench To Remove And Install Accumulator In Mobile-Trac Tensioning System{4197,0756}
1997/01/20 Cab Rear Window Improvements Provide Improved Sealing And Visibility {7301,7310}
1997/01/20 Adjustment To Window Hold Back Latch Improves Operation {7301,7310}
1997/01/20 Special Edition, SEPD0325, "Major Improvements And Service Information For 768C, 772B, 776C, 776D Tractors, 771C, 771D, 775B, 775D Quarry Trucks And 769C, 769D, 773B, 773D, 777C And 777D Trucks" Is Available {0374}
1997/01/20 "E-Trim" Unit Fuel Injectors {1290}
1997/01/20 Modification Of Electronic Control Module (ECM) Controlled Variable Speed Fan Clutch Bracket-Shaft Assembly For Easier Fan Speed Sensor Removal {1359}
1997/01/20 New Ether Starting Aid Groups Include Flexible Hose Assemblies Instead Of Tube Assemblies {1456}
1997/01/20 Increased Tightening Specification Improves Retention Of Thrust Washer Screws In Final Drive {4051}
1997/01/20 New Check Valve Group And Larger O-ring For Load Monitoring System Eliminates O-ring Interference {5067,7200}
1997/01/20 Improved Bearings Used In Output Transfer Gear Group {3159}
1997/01/20 Dump Body Mounted Mud Deflectors (Mud Flaps) Are Available To Prevent Mud From Being Thrown On The Back Of The Tractor {4220}
1997/01/20 A Port Now Provided In The Engine Oil Filter Group For Scheduled Oil Sampling (S.0.S.) {7542,1306,1051}
1997/01/20 VIMS-PC Service Tool Operating System Environment Answers {7601}