1997/01/13 Caterpillar

129-7142 Lifting Beam Simplifies Removal And Installation Of Friction Group{6605,0632,0717}

Usage:

CB-534B Asphalt Compactors With Dual Drum Option

Reference: Service Manual Module; KENR2605; CB-534B; Disassembly and Assembly.

Warranty: G

Features/Benefits

* Used to remove 5E-7415 Friction Group from compactors with dual drum option (provides a way to reach inside the drum where friction group is mounted)

* Used with 6V-2082 Hook Group and overhead lifting device

* Reduces chance of damage to friction group and other drum components during removal (easier to control and guide part out of drum)

* Holds friction group in a vertical position for easier installation of mounting bolts

* Must remove grab hook, bolt, and bracket from stationary tube of 6V-2082 Hook Group before installing 129-7142 Lifting Beam

* Lifting beam is locked onto hook group with setscrew (location of lifting beam can be adjusted to obtain the best balance or center of gravity)

Specifications/Technical Information

Maximum lifting capacity - 136 kg (300 lb)

Setscrew (1) - 2H-3900 Dog Point Setscrew (1/2-13 x 1 1/2 inch long)

Nut (2) - 1F-0748 Weld Nut (1/2-13)

129-7142 Lifting Beam (1) Setscrew. (2) Nut.

Caterpillar Information System:

1997/01/13 Use 126-6611 Seal Driver To Install Outboard Oil Seal On Eccentric Group{6605,6606,0727}

1997/01/13 Spanner Wrenches And Related Tools To Remove And Install Final Drive Bearing Locknut{4050,0602}

1997/01/13 Use 125-4634 Spanner Wrench Assembly To Remove And Install 110-5425 Nut Retaining Axle Shaft Into Housing{3250,0727}

1997/01/13 1U-9058 Hose Group Provides All Necessary Equipment For Adjusting And Releasing Tension On Mobile-Trac Belts{4197,0766}

1997/01/13 1U-9054 Driver Lifter Removes And Installs Rear Drive Wheel Assembly Using Overhead Lifting Equipment{4199,0729}

1997/01/13 Use 1U-9097 Wrench To Remove And Install Accumulator In Mobile-Trac Tensioning System{4197,0756}

1997/01/13 1U-9055 Idler Lifter Removes And Installs Front Idler Assembly Using Overhead Lifting Equipment{4150,0729}

1997/01/13 1U-6130 Guide Stud, 1U-9785 Guide Stud And 1U-9817 Guide Stud Makes Undercarriage Installation And Removal Much Easier And More Efficient{4150,0729}

1997/01/13 1U-9095 Lifter Group Allows Complete Undercarriage To Be Moved With Fork Lift Or Farm Tractor{4150,0632}

1996/12/30 Flywheel Housing To Cylinder Block Joint Improvements {1157,1201}

1996/12/30 Improved Boom Electrical Harness Routing For Increased Reliability {1408}

1996/12/30 Supplement To Operation And Maintenance Manual; "Dual Position Switch To Operate The Tilt Kickout System" {1435,7451}

1997/01/13 Fixture Assembly Allows More Accurate Levelling Of Screed Plates{6643,0764}

1997/01/13 More Collets Now Available For XT5 And XT6 Hoses Using 4C-9480 Hose Tooling Group{0684}

1997/01/13 Use 126-1023 Stem Pusher For Sleeve And Coupling Removal On Hose Assemblies{5057,0684}

1997/01/13 Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}

1997/01/13 Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}

1997/01/13 Quickly And Accurately Set Valve Lash{1105,0766}

1997/01/20 Cab Rear Window Improvements Provide Improved Sealing And Visibility {7301,7310}

1997/01/20 Adjustment To Window Hold Back Latch Improves Operation {7301,7310}

1997/01/20 Special Edition, SEPD0325, "Major Improvements And Service Information For 768C, 772B, 776C, 776D Tractors, 771C, 771D, 775B, 775D Quarry Trucks And 769C, 769D, 773B, 773D, 777C And 777D Trucks" Is Available {0374}

1997/01/20 "E-Trim" Unit Fuel Injectors {1290}

1997/01/20 Modification Of Electronic Control Module (ECM) Controlled Variable Speed Fan Clutch Bracket-Shaft Assembly For Easier Fan Speed Sensor Removal {1359}

1997/01/20 New Ether Starting Aid Groups Include Flexible Hose Assemblies Instead Of Tube Assemblies {1456}