Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
Usage:
3406 Engines
Reference: Special Instruction; SEHS8449; Installation of Water Pump Seal Group.
Warranty: G
Features/Benefits
-
- * Used to correctly and quickly install the 118-9163 Seal Group in water pumps
- * Replaces cancelled 2W-9102 Installation Tool (Water Pump Seal)
- * Seal fits into counterbore of seal installer
- * Seal installer slips over pump shaft (seal is installed using hand force)
- * Used to correctly and quickly install the 118-9163 Seal Group in water pumps
Specifications/Technical Information
- Overall Length - 22.4 mm (.88 inch)
- Diameter - 31.75 mm (1.25 inch)
125-9622 Seal Installer For 3406 Engine Water Pumps
Caterpillar Information System:
1997/01/13 Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13 Use 126-1023 Stem Pusher For Sleeve And Coupling Removal On Hose Assemblies{5057,0684}
1997/01/13 More Collets Now Available For XT5 And XT6 Hoses Using 4C-9480 Hose Tooling Group{0684}
1997/01/13 Fixture Assembly Allows More Accurate Levelling Of Screed Plates{6643,0764}
1997/01/13 129-7142 Lifting Beam Simplifies Removal And Installation Of Friction Group{6605,0632,0717}
1997/01/13 Use 126-6611 Seal Driver To Install Outboard Oil Seal On Eccentric Group{6605,6606,0727}
1997/01/13 Spanner Wrenches And Related Tools To Remove And Install Final Drive Bearing Locknut{4050,0602}
1997/01/13 Use 125-4634 Spanner Wrench Assembly To Remove And Install 110-5425 Nut Retaining Axle Shaft Into Housing{3250,0727}
1997/01/13 1U-9058 Hose Group Provides All Necessary Equipment For Adjusting And Releasing Tension On Mobile-Trac Belts{4197,0766}
1997/01/13 1U-9054 Driver Lifter Removes And Installs Rear Drive Wheel Assembly Using Overhead Lifting Equipment{4199,0729}
1997/01/13 Use 1U-9097 Wrench To Remove And Install Accumulator In Mobile-Trac Tensioning System{4197,0756}
1997/01/13 1U-9055 Idler Lifter Removes And Installs Front Idler Assembly Using Overhead Lifting Equipment{4150,0729}
1997/01/13 Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/20 Cab Rear Window Improvements Provide Improved Sealing And Visibility {7301,7310}
1997/01/20 Adjustment To Window Hold Back Latch Improves Operation {7301,7310}
1997/01/20 Special Edition, SEPD0325, "Major Improvements And Service Information For 768C, 772B, 776C, 776D Tractors, 771C, 771D, 775B, 775D Quarry Trucks And 769C, 769D, 773B, 773D, 777C And 777D Trucks" Is Available {0374}
1997/01/20 "E-Trim" Unit Fuel Injectors {1290}
1997/01/20 Modification Of Electronic Control Module (ECM) Controlled Variable Speed Fan Clutch Bracket-Shaft Assembly For Easier Fan Speed Sensor Removal {1359}
1997/01/20 New Ether Starting Aid Groups Include Flexible Hose Assemblies Instead Of Tube Assemblies {1456}
1997/01/20 Increased Tightening Specification Improves Retention Of Thrust Washer Screws In Final Drive {4051}
1997/01/20 New Check Valve Group And Larger O-ring For Load Monitoring System Eliminates O-ring Interference {5067,7200}
1997/01/20 Improved Bearings Used In Output Transfer Gear Group {3159}
1997/01/20 Dump Body Mounted Mud Deflectors (Mud Flaps) Are Available To Prevent Mud From Being Thrown On The Back Of The Tractor {4220}
1997/01/20 A Port Now Provided In The Engine Oil Filter Group For Scheduled Oil Sampling (S.0.S.) {7542,1306,1051}