Usage:
D250E (5TN),
D300E (7FN),
D350E (9LR),
D400E (2YR) Articulated Trucks
Dump body mounted mud deflectors (mud flaps) are available to keep mud from being thrown onto the rear of the tractor.
The attachment body mounted mud flaps can be installed on all D250E (5TN), D300E (7FN), D350E (9LR) and D400E (2YR) Articulated Trucks. Use the following method to install the body mounted mud flaps.
D250E Articulated Trucks
Illustration 1. Dimensions for the fabricated mounting plates
1. If necessary, fabricate four mounting plates from 8.0 mm (.31 in) thick mild steel using the dimensions in Illustration 1.
Illustration 2. Location of the fabricated plates on the D250E Articulated Truck body. Side view. (J) 5026.0 ± 3.0 mm (197.87 ± .12 in).
Illustration 3. Section H-H. (K) 40.0 ± 2.0 mm (1.57 ± .08 in). (L) 857.0 ± 1.0 mm (33.74 ± .04 in).
2. Weld the fabricated plates to the sides of the dump body with a 6.0 mm (.24 in) fillet weld all around. The location of the fabricated plates is shown in Illustrations 2 and 3.
Illustration 4. Parts location. (1) 134-5474 Mounting Plates. (2) 134-5475 Mud Deflectors. (3) 5P-2566 Bolt. (4) 6V-8188 Nut. (5) 8T-4223 Washer. (6) 9B-7237 Bolt. (7) 4J-8265 Lock Nut. (8) 8T-4896 Washer.
3. Install the mud deflectors and mounting plates as shown in Illustration 4.
D300E Articulated Trucks
1. If necessary, fabricate four mounting plates from 8.0 mm (.31 in) thick mild steel using the dimensions in Illustration 1 and the dimensions chart in the D250E Articulated Truck portion of this article.
Illustration 5. Location of the fabricated plates on the D300E Articulated Truck body. Side view. (A) 5017.0 ± 3.0 mm (201.06 ± 12 in).
Illustration 6. Section N-N. (B) 40.0 ± 2.0 mm (1.57 ± .08 in). (C) 1070.0 ± 1.0 (42.13 ± .04 in).
2. Weld the fabricated plates to the sides of the dump body with a 6.0 mm (.24 in) fillet weld all around. The location of the fabricated plates is shown in Illustrations 5 and 6.
Illustration 7. Parts location. (1) 134-5827 Mounting Plates). (2) 133-7562 Mud Deflectors. (3) 5P-2566 Bolt. (4) 6V-8188 Nut. (5) 8T-4223 Washer. (6) 9B-7237 Bolt. (7) 4J-8265 Lock Nut. (8) 8T-4896 Washer.
3. Install the mud deflectors and mounting plates as shown in Illustration 7.
D350E Articulated Trucks
1. If necessary, fabricate four mounting plates from 8.0 mm (.31 in) thick mild steel using the dimensions in Illustration 1 and the dimensions chart in the D250E Articulated Truck portion of this article.
Illustration 8. Location of the fabricated plates on the body. Side View. (A) 4828.0 ± 3.0 mm (190.10 ± .12 in).
Illustration 9. Section M-M. (B) 40.0 ± 2.0 mm (1.57 ± .08 in). (C) 857.0 ± 1.0 mm (33.70 ± .04 in)
2. Weld the fabricated plates to the sides of the dump body with a 6.0 mm (.24 in) fillet weld all around. The location of the fabricated plates is shown in Illustrations 8 and 9.
Illustration 10. Parts location. (1) 134-5474 Mounting Plates. (2) 133-7564 Mud Deflectors. (3) 5P-2566 Bolt. (4) 6V-8188 Nut. (5) 8T-4223 Washer. (6) 9B-7237 Bolt. (7) 4J-8265 Lock Nut. (8) 8T-4896 Washer.
3. Install the mud deflectors and mounting plates as shown in Illustration 10.
D400E Articulated Trucks
1. If necessary, fabricate four mounting plates from 8.0 mm (.31 in) thick mild steel using the dimensions in Illustration 1 and the dimensions chart in the D250E Articulated Truck portion of this article.
Illustration 11. Location of the fabricated plates on the body. Side view. (A) 50.0 ± 2.0 mm (1.97 ± .08 in).
Illustration 12. View K-K. (B) 320.0 ± 2.0 mm (12.60 ± .08 in). (C) 857.0 ± 1.0 mm (33.74 ± .04 in)
2. Weld the fabricated plates to the sides of the dump body with a 6.0 mm (.24 in) fillet weld all around. The location of the fabricated plates is shown in Illustrations 11 and 12.
Illustration 13. Parts location. (1) 134-5474 Mounting Plates. (2) 133-7564 Mud Deflectors. (3) 5P-2566 Bolt. (4) 6V-8188 Nut. (5) 8T-4223 Washer. (6) 9B-7237 Bolt. (7) 4J-8265 Lock Nut. (8) 8T-4896 Washer.
3. Install the mud deflectors and mounting plates as shown in Illustration 13.