Seal Improvement Prevents Leakage In Hook Winch Groups {5417}
Usage:
561H (6NL) Pipelayer
Description of Change: A new seal prevents leakage in the 108-5928 Final Drive Group for the 108-5851 Hook Winch Group, 114-0111 Final Drive Group for the 114-0106 Hook Winch Group, and the 114-3460 Final Drive Group for the 114-3461 Hook Winch Group.
Adaptable To: The new 141-6602 Lip Type Seal replaces the former 108-8840 Lip Type Seal. This change is effective with the 561H (6NL450-Up) Pipelayer.
Illustration 1. 108-5928 Final Drive Group.
Illustration 2. 114-0111 Final Drive Group.
Illustration 3. 114-3460 Final Drive Group.
Caterpillar Information System:
1996/12/30 3054 Engine - New Rear Crankshaft Oil Seal Housing Provides Better Seal {1161}
1996/12/30 Description Of August 1996 (AUG96) Personality Module Changes For 3176B (43Z), 3176C (7ZR), And 3196 (6AR) Engines {1902,1901,1923,7414}
1996/12/23 New Rotocoil Assembly Used In Engine Cylinder Head Groups{1109}
1996/12/23 New Telehandler Brake Pack Adjustment Procedure For Rebuilt Brake Groups{4251,4004,4255,4261}
1996/12/23 New Temperature Sensors Used Which Prevent False Over Temperature Warnings{1906,1400}
1996/12/23 Torque/Turn Method Used To Tighten Brake Caliper Retaining Bolts{4256}
1996/12/23 Improved Seals And Bearings Used To Reduce Seal Leaks In Transfer Gear Groups (6WD){3250}
1996/12/23 Orificed Check Valve Removed From Hoist Cylinder Groups For Truck Bed{5102,5486}
1996/12/23 Externally Adjusted Relief Valve Used In Steering Control Valve Group{4307,4322}
1996/12/23 Improved Relief Valve Group For Drive System Reduces Pressure Spikes{5069}
1996/12/16 Tools Used For Transmission Overhaul {3400}
1996/12/16 1U-9069 Limp Home Switch Allows Transmission Control Valve To Be Remotely Operated If Controller Fails {3418}
1996/12/30 Improved Seals And Bearings Used To Reduce Seal Leaks In Output Transfer Gear Groups {3159,3003}
1996/12/30 New Hydraulic Pump Group Increases Service Life {5070}
1996/12/30 Procedure For Aligning Front Suspension Frame Group With Output Transfer Gearbox {7200}
1996/12/30 Supplement To Operation And Maintenance Manual; "Dual Position Switch To Operate The Tilt Kickout System" {1435,7451}
1996/12/30 Improved Boom Electrical Harness Routing For Increased Reliability {1408}
1996/12/30 Flywheel Housing To Cylinder Block Joint Improvements {1157,1201}
1997/01/13 1U-9095 Lifter Group Allows Complete Undercarriage To Be Moved With Fork Lift Or Farm Tractor{4150,0632}
1997/01/13 1U-6130 Guide Stud, 1U-9785 Guide Stud And 1U-9817 Guide Stud Makes Undercarriage Installation And Removal Much Easier And More Efficient{4150,0729}
1997/01/13 1U-9055 Idler Lifter Removes And Installs Front Idler Assembly Using Overhead Lifting Equipment{4150,0729}
1997/01/13 Use 1U-9097 Wrench To Remove And Install Accumulator In Mobile-Trac Tensioning System{4197,0756}
1997/01/13 1U-9054 Driver Lifter Removes And Installs Rear Drive Wheel Assembly Using Overhead Lifting Equipment{4199,0729}
1997/01/13 1U-9058 Hose Group Provides All Necessary Equipment For Adjusting And Releasing Tension On Mobile-Trac Belts{4197,0766}