Certain 0R3233 And 0R3860 Scavenge Oil Pumps Need To Be Removed From Parts Stock
Usage:
Certain 0R3233 And 0R3860 Scavenge Oil Pumps Need To Be Removed From Parts Stock
Show/hide table
| SMCS - | 1312 | PI7345 |
February 11, 1995
U-25
A-22
AU-9
B-9
S-15
H-3
O-18
TM-1
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
Termination Date
May 31, 1995Problem
The drive gear may not be properly installed on the shaft assembly of certain 0R3233 and 0R3860 Scavenge Oil Pumps in dealer Parts Stock. If the drive gear is not properly installed, it may come off the shaft.
Action Required
Inspect the date code on the tag of all 0R3233 and 0R3860 Scavenge Oil Pumps in dealer Parts Stock. The date code is in the numeralkod format.
If the date code is prior to February 1995, open the box and determine if the pump is a new pump used as "seed stock" or if it is a "reman" pump. Only "reman" pumps will be stamped with the reman part number.
If the pump is a new pump used as "seed stock", return it to dealer Parts Stock. If the pump is a "reman" pump, remove it from dealer Parts Stock.
Service Claim Allowances
Submit one claim for all 0R3233 and 0R3860 Scavenge Oil Pumps removed from Parts Stock that are stamped with a reman part number.
Parts Disposition
U.S. and Canadian Dealers
Return all 0R3233 and 0R3860 Scavenge Oil Pumps removed from Parts Stock and a copy of the claim to:
Attn: Bill Harland - Warranty Review
501 Cardinal Drive
Corinth, MS 38834
All Other Dealers
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Caterpillar Information System:
Product Support Program For Reworking The Pump Drive Transfer Gear Group On Certain 12G And 140G All Wheel Drive (AWD) Motor Graders Product Support Program For Reworking The Pump Drive Transfer Gear Group On Certain 12G And 140G All Wheel Drive (AWD) Motor Graders
A New Radiator Relief Valve Assembly Needs To Be Installed On Certain 768C And 772B Tractors; And 769C, 771C, 773B, And 775B Trucks A New Radiator Relief Valve Assembly Needs To Be Installed On Certain 768C And 772B Tractors; And 769C, 771C, 773B, And 775B Trucks
Product Support Program For Replacing The Rear Axle Shaft On Certain CP563, CS563 And CS583 Compactors Product Support Program For Replacing The Rear Axle Shaft On Certain CP563, CS563 And CS583 Compactors
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
A New Fuel Tank Drain And/Or A High Level Fuel Vent Needs To Be Installed On Certain Challenger 75, 75C And 85C Tractors A New Fuel Tank Drain And/Or A High Level Fuel Vent Needs To Be Installed On Certain Challenger 75, 75C And 85C Tractors
Service Letter Cancellation Service Letter Cancellation
Product Support Program For Replace Filter By-pass Screen In Steering Hydraulic Tank On Certain 793 And 793B Off-highway Trucks Product Support Program For Replace Filter By-pass Screen In Steering Hydraulic Tank On Certain 793 And 793B Off-highway Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Brake Switch Contact Block Needs To Be Changed On Certain CP433C, CS433C, CS531, CS533, CB534B, CP563, CS563 And CB634 Compactors Brake Switch Contact Block Needs To Be Changed On Certain CP433C, CS433C, CS531, CS533, CB534B, CP563, CS563 And CB634 Compactors
A New Throttle Cable Needs To Be Installed On Certain CP323, CS323, CS431B, CP433B And CS433B Compactors A New Throttle Cable Needs To Be Installed On Certain CP323, CS323, CS431B, CP433B And CS433B Compactors
Produce Support Program For Replacing The Vibratory Tachometer On Certain CP531, CP533, CS533, CP563, CS563, CS573 And CS583 Compactors Produce Support Program For Replacing The Vibratory Tachometer On Certain CP531, CP533, CS533, CP563, CS563, CS573 And CS583 Compactors
A New Air Over Hydraulic Cylinder Needs To Be Installed On Certain 768C And 772B Tractors; And 769C, 771C, 773B, And 775B Trucks A New Air Over Hydraulic Cylinder Needs To Be Installed On Certain 768C And 772B Tractors; And 769C, 771C, 773B, And 775B Trucks
The Orifice In The Vibration Pump Override Valve Needs To Be Replaced On Certain CB534B And CB634 Compactors The Orifice In The Vibration Pump Override Valve Needs To Be Replaced On Certain CB534B And CB634 Compactors
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
PRODUCT SUPPORT PROGRAM FOR REPLACING BOOM ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING BOOM ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
The Transmission Shifter Console Or Shift Gate Needs To Be Modified On Certain Challenger 65, 65B, 65C, 70C, 75, 75C And 85C Tractors The Transmission Shifter Console Or Shift Gate Needs To Be Modified On Certain Challenger 65, 65B, 65C, 70C, 75, 75C And 85C Tractors
Product Support Program For Replacing The Steering Wheel On Certain 12G, 14G, 16G, 120G, And 140gGMotor Graders Product Support Program For Replacing The Steering Wheel On Certain 12G, 14G, 16G, 120G, And 140gGMotor Graders
The 9R7011 Tower Loader Pin Fails On Certain 416B, 426B And 436B Backhoe Loaders The 9R7011 Tower Loader Pin Fails On Certain 416B, 426B And 436B Backhoe Loaders
Product Support Program For Replacing The Linkage Plate Of The Propel Pump Control Cable Bracket on Certain CP433C And CS433C Compactors Product Support Program For Replacing The Linkage Plate Of The Propel Pump Control Cable Bracket on Certain CP433C And CS433C Compactors
A New Air Cleaner Canister May Need To Be Installed On Certain 918F, 928F And 953B Loaders, IT18F And IT28F Tool Carriers A New Air Cleaner Canister May Need To Be Installed On Certain 918F, 928F And 953B Loaders, IT18F And IT28F Tool Carriers
A-Frame/Pin-Shim Joint Bolts Need To Be Tightened To The Correct Torque On Certain 777C Trucks A-Frame/Pin-Shim Joint Bolts Need To Be Tightened To The Correct Torque On Certain 777C Trucks
The Frame Needs To Be Reinforced On Certain CS573 And CS583 Compactors Equipped With An Open ROPS The Frame Needs To Be Reinforced On Certain CS573 And CS583 Compactors Equipped With An Open ROPS
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Product Support Program For Replacing The Front Gear Train On Certain 3208 Industrial Engines Used Primarily In Fertilizer Spreader Applications Product Support Program For Replacing The Front Gear Train On Certain 3208 Industrial Engines Used Primarily In Fertilizer Spreader Applications