Product Support Program For Replacing The Steering Wheel On Certain 12G, 14G, 16G, 120G, And 140gGMotor Graders Caterpillar


Product Support Program For Replacing The Steering Wheel On Certain 12G, 14G, 16G, 120G, And 140gGMotor Graders

Usage:

@media screen { div.divFooter { display: none; } } @media print { div.divFooter { position: fixed; bottom: 0; right: 0; } }
Caterpillar: Confidential Yellow

NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

NOTE: This Program can be administered either before or after a failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS8296" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and use "T" as the SIMS Description Code. If administered after failure, use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.

NOTE: This Revised Service Letter replaces the March 3, 1995 Service Letter. Changes have been made to the Affected Product.

Termination Date

March 31, 1996

Problem

The steering wheel on certain 12G, 14G, 16G, 120G, and 140G Motor Graders may have an unpleasant or foul smell.

Affected Product
Model & Identification Number

12G (3WC1780-1810 61M15517-15642 )

14G (03L239-241 96U9193-9235 )

16G (93U3535-3545)

120G (87V9810-9855 11W1353-1355 61W839-843 )

140G (5MD2591-2785 50H1689-1710 72V16460-16649 13W915-925 )

120G (4HD2334-2420)

Parts Needed

1 - 6G3244 Button
1 - 6G3274 Retainer
1 - 6G5374 Wheel-Steering

Action Required

Replace the existing steering wheel with a new one if operators complain of a foul or unpleasant smell in the operators compartment or if the smell is detected at predelivery.

Service Claim Allowances

NOTE: This is a 1-hour job.

Parts Disposition

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Caterpillar Information System:

The Transmission Shifter Console Or Shift Gate Needs To Be Modified On Certain Challenger 65, 65B, 65C, 70C, 75, 75C And 85C Tractors The Transmission Shifter Console Or Shift Gate Needs To Be Modified On Certain Challenger 65, 65B, 65C, 70C, 75, 75C And 85C Tractors
PRODUCT SUPPORT PROGRAM FOR REPLACING BOOM ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING BOOM ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks The Throttle Position Sensor Needs To Be Replaced On Certain D11N And 776C Tractors And 777C, 785B, 789B And 793B Trucks
The Orifice In The Vibration Pump Override Valve Needs To Be Replaced On Certain CB534B And CB634 Compactors The Orifice In The Vibration Pump Override Valve Needs To Be Replaced On Certain CB534B And CB634 Compactors
Certain 0R3233 And 0R3860 Scavenge Oil Pumps Need To Be Removed From Parts Stock Certain 0R3233 And 0R3860 Scavenge Oil Pumps Need To Be Removed From Parts Stock
Product Support Program For Reworking The Pump Drive Transfer Gear Group On Certain 12G And 140G All Wheel Drive (AWD) Motor Graders Product Support Program For Reworking The Pump Drive Transfer Gear Group On Certain 12G And 140G All Wheel Drive (AWD) Motor Graders
A New Radiator Relief Valve Assembly Needs To Be Installed On Certain 768C And 772B Tractors; And 769C, 771C, 773B, And 775B Trucks A New Radiator Relief Valve Assembly Needs To Be Installed On Certain 768C And 772B Tractors; And 769C, 771C, 773B, And 775B Trucks
Product Support Program For Replacing The Rear Axle Shaft On Certain CP563, CS563 And CS583 Compactors Product Support Program For Replacing The Rear Axle Shaft On Certain CP563, CS563 And CS583 Compactors
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
A New Fuel Tank Drain And/Or A High Level Fuel Vent Needs To Be Installed On Certain Challenger 75, 75C And 85C Tractors A New Fuel Tank Drain And/Or A High Level Fuel Vent Needs To Be Installed On Certain Challenger 75, 75C And 85C Tractors
Service Letter Cancellation Service Letter Cancellation
Product Support Program For Replace Filter By-pass Screen In Steering Hydraulic Tank On Certain 793 And 793B Off-highway Trucks Product Support Program For Replace Filter By-pass Screen In Steering Hydraulic Tank On Certain 793 And 793B Off-highway Trucks
The 9R7011 Tower Loader Pin Fails On Certain 416B, 426B And 436B Backhoe Loaders The 9R7011 Tower Loader Pin Fails On Certain 416B, 426B And 436B Backhoe Loaders
Product Support Program For Replacing The Linkage Plate Of The Propel Pump Control Cable Bracket on Certain CP433C And CS433C Compactors Product Support Program For Replacing The Linkage Plate Of The Propel Pump Control Cable Bracket on Certain CP433C And CS433C Compactors
A New Air Cleaner Canister May Need To Be Installed On Certain 918F, 928F And 953B Loaders, IT18F And IT28F Tool Carriers A New Air Cleaner Canister May Need To Be Installed On Certain 918F, 928F And 953B Loaders, IT18F And IT28F Tool Carriers
A-Frame/Pin-Shim Joint Bolts Need To Be Tightened To The Correct Torque On Certain 777C Trucks A-Frame/Pin-Shim Joint Bolts Need To Be Tightened To The Correct Torque On Certain 777C Trucks
The Frame Needs To Be Reinforced On Certain CS573 And CS583 Compactors Equipped With An Open ROPS The Frame Needs To Be Reinforced On Certain CS573 And CS583 Compactors Equipped With An Open ROPS
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Product Support Program For Replacing The Front Gear Train On Certain 3208 Industrial Engines Used Primarily In Fertilizer Spreader Applications Product Support Program For Replacing The Front Gear Train On Certain 3208 Industrial Engines Used Primarily In Fertilizer Spreader Applications
Product Support Program For Replacing The Transmission Sleeve Bearings And Bonded Pistons On Certain 910F, IT12F And IT14F Wheel Loaders Product Support Program For Replacing The Transmission Sleeve Bearings And Bonded Pistons On Certain 910F, IT12F And IT14F Wheel Loaders
Certain 1G7437 Coupling Shafts Need To Be Removed From Parts Stock Certain 1G7437 Coupling Shafts Need To Be Removed From Parts Stock
Replace Steering Accumulator Charging Valve On Certain 793 And 793B Off-highway Trucks Replace Steering Accumulator Charging Valve On Certain 793 And 793B Off-highway Trucks
Certain 769C, 771C, And 775B Trucks Equipped With Automatic Retarder Control Need To Have The Correct Harness Code Plug Installed Certain 769C, 771C, And 775B Trucks Equipped With Automatic Retarder Control Need To Have The Correct Harness Code Plug Installed
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.