Usage:
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
NOTE: This Program must be administered as soon as possible. When reporting the repair, use "PI3743" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code. Exception: If the repair is done after failure, use "PI3743" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
Completion Date
September 30, 1995Termination Date
March 31, 1996Problem
The air cleaner outlet cover assembly may fail allowing unfiltered air to enter the engine intake manifold on certain 918F, 928F and 953B Loaders and IT18F and IT28F Tool Carriers.
Affected Product
Model & Identification Number
918F (3TJ1-355 2CK1-253 )
928F (8AK1-253 2XL1-478 )
953B (5MK1-1421)
IT18F (6ZF1-316 5EJ1-181 )
IT28F (1JL1-118 3CL1-461 )
Parts Needed
Dealers will need to order parts for this Program.
- 1 - 1236044 Canister Assembly (918F and IT18F)
or
- 1 - 1236043 Canister Assembly (928F and IT28F)
or
- 1 - 1236042 Canister Assembly (953B)
Action Required
Inspect the air cleaner assembly on the outlet side of the canister. If the canister has four strip welds or a continuous weld around the area shown in the Illustration below, no further action is necessary. Complete a SIMS ticket for the machine listing PI3743 as the Part Number Causing Failure, and put "Air Cleaner is OK" in the Comment section.
If the canister is not welded as shown below, replace the air cleaner with the appropriate new air cleaner.
Owner Notification
U.S. and Canadian owners will receive the attached Owner Notification.
Service Claim Allowances
Inspection Only
NOTE: This is a .5-hour job.
Inspection and Replacement
NOTE: This is a 1.0-hour job.
NOTE: U.S. and Canadian Dealers Only - This Program does not qualify for a Type 2 SIMS Report.
Parts Disposition
U.S. and Canadian Dealers
If an air cleaner is replaced, mark the product identification number and service meter units (smu) on the air cleaner and return it, freight collect, to:
400 Donaldson Drive
Chillicothe, MO 64601
Attention: Dick Jensen
COSA Dealers
If an air cleaner is replaced, mark the product identification number and service meter units (smu) on the air cleaner and return it, freight collect, to the Claims Section Supervisor of the Caterpillar Parts Depot at Grimbergen.
All other dealers
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
NOTE: MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach.
- (1-Owner Notification)
Copy Of Owner Notification For U.S. And Canadian Owners