Usage:
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
NOTE: This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS0827" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.
Termination Date
March 31, 1996Problem
The existing 1179027 Plate of the propel pump control cable bracket may allow excessive travel causing the neutral start switch to come out of adjustment and damage the pump bracket on certain CP433C and CS433C Compactors.
Affected Product
Model & Identification Number
CP433C (2JM126-156)
CS433C (3TM124-154)
Parts Needed
- 1 - 1242468 Plate
Action Required
Parts Stock
Remove all 1179027 from Parts Stock.
Affected Product
1. Remove the right side service access panel.
2. Remove the existing 1179027 Plate bolted to the axle pump.
3. Install a new 1242468 Plate.
4. Follow the procedures in the Service Manual, KENR2646, page 42, to adjust the neutral start switch.
5. Replace the access panel.
Service Claim Allowances
Parts Stock
Submit one claim for all 1179027 removed from Parts Stock.
NOTE: US and Canadian Dealers Only - When submitting a Parts Stock claim use 99Z00001 in the Product Identification Number Field.
Affected Product
NOTE: This is a 2-hour job.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.