1999/02/01 Caterpillar

Use FT2613 Cap Assembly For Adjusting 7E-3407 Gas Regulator{1715}

Usage:

G3508 (4WD, 2JF, 9TG, 2TJ, 9AW),
G3512 (4KC, 5JD, 7NJ, 6JW, 7SZ),
G3516 (3RC, 8LD, 4EK, 5PN, 8PW, 7EZ, 8BZ) Engines

Features/Benefits

* Used to adjust gas line pressure on 7E-3407 Gas Regulators

* Adjust regulator while engine is running

* Eliminates costly engine downtime

* Allows adjustment of regulator with no leakage

Specifications/Technical Information

To install, push 155-3062 through FT2613 and 8T-5149. Position hex/washer end into regulator and tighten cap. Make sure 123-5974 O-ring is in place. Tighten fitting around adjusting tool to prevent leakage, but loose enough to adjust regulator. Adjust regulator and remove tools when finished.

Gas Regulator Adjusting Tool

(1) 155-3062 Regulator Adjusting Tool

(2) 8T-5149 Fitting

(3) FT2613 Cap Assembly and 123-5974 O-ring

FT2613 Cap Assembly made from 123-3972 Cap, Seal (A) 1/2-14 NPTF

Caterpillar Information System:

1999/02/01 161-3995 Oil Filter Spring Group Available To Increase Oil Filter Element Seating Force{1306}

1999/02/01 Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}

1999/02/01 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fume Recirculation{1063}

1999/02/01 New Turbocharger Exhaust Coupling Used In Turbocharger Groups{1052,1061,1065}

1999/02/01 New Piston And Rod Groups Used{1214,1215}

1999/02/01 Bearing Specifications For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Drive Group{1714}

1999/02/01 Improved Cylinder Head Groups For G3400 Engines{1100,1101}

1999/01/01 Use 144-0235 Belt Tension Gauge To Check Belt Tension{7461,1357}

1999/01/01 Use 145-9342 Filter Crusher to Reduce Waste And Collect Oil{5720}

1999/01/01 Use 9U-5968 Hydrostatic Filter Group To Filter Contaminanted Oil{5050,3200,3218}

1999/01/01 Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView{1000,3000,4000,5000,6000}

1999/01/01 Use 131-5050 DataView Group and 131-5051 DataView Portable TechStation Group For Accurate Diagnostics{1000,3000,4000,5000,6000,0788}

1999/02/01 New Lines Groups Available To Eliminate Leakage In Air Piping{1058,1071}

1999/02/01 New Exhaust Manifold Shield Assemblies Provide Increased Heat Protection For Wastegate Area{1067}

1999/02/01 Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface Inspection{1101}

1999/02/01 New Prechamber Assembly And Ignition Body Assembly In Prechamber Groups{1106}

1999/02/01 New Cylinder Head Gaskets (Combustion Rings) Available{1124}

1999/02/01 New Thicker Jacket Water Side Cover Help Prevent Coolant Leaks{1201}

1999/02/01 Crankshaft Oil Passage Plugs Should Be Checked For Tightness On Some Crankshafts At Engine Overhauls{1202}

1999/02/01 New Intermittent Prelube Basic Pump Group And Bracket Assembly Used{1319}

1999/02/01 Extended Life Coolant (ELC) Now Preferred For 3600 Diesel Engines{1395}

1999/02/01 New Relief Valves Used In Prelube Lines Groups And Starting Motor Air Pressure Regulator Groups{1451,1469}

1999/02/01 New Valve Improves Fuel Pressure Regulator Adjustment On 3600 Diesel Engines{1715}

1999/02/01 New Woodward EGB13P Reverse Acting Actuator Assembly{1716}