1999/01/01 Caterpillar

Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView{1000,3000,4000,5000,6000}

Usage:

Electronically Controlled Cat®
Equipment

Warranty Category: Y

Features/Benefits

* Used to test CAT® PWM and analog sensors on or off the machine

* Used with 131-5050 DataView and DataView 2.0 software

* DataView 2.0 software lists common sensors for easy setup

* Internal power supply powers active sensors while removed from equipment

* CE certified for European use * Recommended tool

Specifications/Technical Information

Input impedance - 120 Ohms

Input voltage - 5 VDC (from DataView)

Output voltage - 9.4 VDC (sensor power)

Maximum sensor current - 40 mA maximum at 9.4 VDC

Operating temperature - -17 to 60°C (0 to 140°F)

Size - 85 x 56 x 35 mm (3.3 x 2.2 x 1.4 in)

Weight (153-9625) - 0.23 kg (.5 lb)

153-9630 Test Group, Sensor

(1) 153-9629 Insert Foam

153-9629 Insert Foam

6V-6096 Foam

NEEG2813 Decal

(2) 153-9625 PWM Sensor Adapter

(3) 153-9627 Cable Assembly, DT

(4) 153-9626 Cable Assembly, HD

Reference

Tool Operating Manual; NEHS0711, Caterpillar PWM/Analog Adapter Sensor Kit for DataView

Caterpillar Information System:

1999/01/01 Use 131-5050 DataView Group and 131-5051 DataView Portable TechStation Group For Accurate Diagnostics{1000,3000,4000,5000,6000,0788}

1999/01/01 Use 149-5138 Mechanical Push/Puller For Extra Force In General Purpose Applications{0700}

1999/01/01 New 146-4080 Digital Multimeter Available For Troubleshooting Electronic Circuits{0115}

1999/01/01 EMCP II+ Has New Default Setpoints To Reduce Nuisance Shutdowns{4490,7451}

1999/01/01 Corrections To Special Instruction, REHS0181, Instructions For Mounting The Electronic Modular Control Panel II In A Remote Location{4490,7451}

1999/01/01 New Status Control Module (SCM) Provides Increased Engine Protection{7451}

1999/01/01 Procedures For Checking And Charging Hydrax Accumulator{1716}

1999/01/01 New Combustion Sensor Groups{1555}

1999/01/01 New Cable Tray Mounting Group Is Used In Conjunction With Treated Water Aftercooler Group{1408}

1999/01/01 Use 145-0316 Cleaning Kit For Gas Engine 2-Stage After Coolers{1350}

1999/01/01 Installation Procedure For Exhaust Valve Rotator{1109}

1999/01/01 New Cylinder Head Group And New Cylinder Head Assembly Help Prevent Early Hour Valve Guttering In Heavy Fuel Oil (HFO) Applications{1103,1105}

1999/01/01 Use 9U-5968 Hydrostatic Filter Group To Filter Contaminanted Oil{5050,3200,3218}

1999/01/01 Use 145-9342 Filter Crusher to Reduce Waste And Collect Oil{5720}

1999/01/01 Use 144-0235 Belt Tension Gauge To Check Belt Tension{7461,1357}

1999/02/01 Improved Cylinder Head Groups For G3400 Engines{1100,1101}

1999/02/01 Bearing Specifications For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Drive Group{1714}

1999/02/01 New Piston And Rod Groups Used{1214,1215}

1999/02/01 New Turbocharger Exhaust Coupling Used In Turbocharger Groups{1052,1061,1065}

1999/02/01 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fume Recirculation{1063}

1999/02/01 Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}

1999/02/01 161-3995 Oil Filter Spring Group Available To Increase Oil Filter Element Seating Force{1306}

1999/02/01 Use FT2613 Cap Assembly For Adjusting 7E-3407 Gas Regulator{1715}

1999/02/01 New Lines Groups Available To Eliminate Leakage In Air Piping{1058,1071}