1999/01/01 Caterpillar

Use 9U-5968 Hydrostatic Filter Group To Filter Contaminanted Oil{5050,3200,3218}

Usage:

All Models

Warranty: G

Features/Benefits

* Used to filter out contamination (particles) after catastrophic pump or motor failure

* 6 micron absolute rating

* Works in closed-loop hydrostatic hydraulic systems

* Simple to install, as rectifier block automatically routes oil through filter in correct flow direction, regardless of inlet and outlet connections.

* Can be permanently attached to system or vehicle

* Easily fitted with currently available quick disconnect fittings for fast and easy installation - one unit can serve several machines.

Specifications/Technical Information

Overall size - 300 x 250 x 558 mm (12.0 x 10.0 x 22.0 in)

Maximum working pressure - 41,364 kPa (6000 psi)

Flow rate - 342 lpm (90 gpm)

Filter rating - 6 micron, absolute

Inlet/outlet port connection - 1-1/4 inch quick disconnect

Service Parts

9U-5966 Filter Element, 6 Micron Absolute

9U-5969 Valve, Check

9U-5967 Valve Seal Kit, Check

4C-5093 Nipple, Quick Disconnect

4C-5094 Coupler, Quick Disconnect

9U-5968 Hydrostatic Filter Group

Caterpillar Information System:

1999/01/01 Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView{1000,3000,4000,5000,6000}

1999/01/01 Use 131-5050 DataView Group and 131-5051 DataView Portable TechStation Group For Accurate Diagnostics{1000,3000,4000,5000,6000,0788}

1999/01/01 Use 149-5138 Mechanical Push/Puller For Extra Force In General Purpose Applications{0700}

1999/01/01 New 146-4080 Digital Multimeter Available For Troubleshooting Electronic Circuits{0115}

1999/01/01 EMCP II+ Has New Default Setpoints To Reduce Nuisance Shutdowns{4490,7451}

1999/01/01 Corrections To Special Instruction, REHS0181, Instructions For Mounting The Electronic Modular Control Panel II In A Remote Location{4490,7451}

1999/01/01 New Status Control Module (SCM) Provides Increased Engine Protection{7451}

1999/01/01 Procedures For Checking And Charging Hydrax Accumulator{1716}

1999/01/01 New Combustion Sensor Groups{1555}

1999/01/01 New Cable Tray Mounting Group Is Used In Conjunction With Treated Water Aftercooler Group{1408}

1999/01/01 Use 145-0316 Cleaning Kit For Gas Engine 2-Stage After Coolers{1350}

1999/01/01 Installation Procedure For Exhaust Valve Rotator{1109}

1999/01/01 Use 145-9342 Filter Crusher to Reduce Waste And Collect Oil{5720}

1999/01/01 Use 144-0235 Belt Tension Gauge To Check Belt Tension{7461,1357}

1999/02/01 Improved Cylinder Head Groups For G3400 Engines{1100,1101}

1999/02/01 Bearing Specifications For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Drive Group{1714}

1999/02/01 New Piston And Rod Groups Used{1214,1215}

1999/02/01 New Turbocharger Exhaust Coupling Used In Turbocharger Groups{1052,1061,1065}

1999/02/01 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fume Recirculation{1063}

1999/02/01 Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}

1999/02/01 161-3995 Oil Filter Spring Group Available To Increase Oil Filter Element Seating Force{1306}

1999/02/01 Use FT2613 Cap Assembly For Adjusting 7E-3407 Gas Regulator{1715}

1999/02/01 New Lines Groups Available To Eliminate Leakage In Air Piping{1058,1071}

1999/02/01 New Exhaust Manifold Shield Assemblies Provide Increased Heat Protection For Wastegate Area{1067}