Use 145-9342 Filter Crusher to Reduce Waste And Collect Oil{5720}
Usage:
All Models
Warranty Category: G
Features/Benefits
-
- * Reduces used filters by approximately 80%
- * Crushes up to 120 filters per hour
- * Disposal container holds 2 to 3 times more crushed filters (reduces disposal cost)
- * Squeezes oil into a 55 gallon collection drum (recycled oil can be used or sold for heating)
- * Heavy-duty construction for durability and long life
- * Two-lever operation (safe and easy)
- * Works on most common sizes of filters
- * Reduces used filters by approximately 80%
NOTE: Do not crush fuel filters with this machine.
Specifications/Technical Information
- Overall size (h x w x l) - 290 x 91 x 102 cm (116.0 x 36.0 x 40.0 in)
- Containment opening size (h x w) - 43 x 23 cm (13.5 x 9.0 in)
- Maximum filter crushing area (h x dia.) - 58 x 24 cm (23.0 x 9.3 in)
- Cycle time up and down (no filter) - 19 seconds
- Cycle time up and down with typical filter - 26 seconds
- Crushing force - 27 metric tons (30 tons)
- Motor size - 5.6 kW (7.5 hp)
- Electrical requirements - 220/440 volt, 3 phase
- Used oil container (not included) - 208 L (55 gal)
- Containment opening size (h x w) - 43 x 23 cm (13.5 x 9.0 in)
Caterpillar Information System:
1999/01/01 Use 9U-5968 Hydrostatic Filter Group To Filter Contaminanted Oil{5050,3200,3218}
1999/01/01 Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView{1000,3000,4000,5000,6000}
1999/01/01 Use 131-5050 DataView Group and 131-5051 DataView Portable TechStation Group For Accurate Diagnostics{1000,3000,4000,5000,6000,0788}
1999/01/01 Use 149-5138 Mechanical Push/Puller For Extra Force In General Purpose Applications{0700}
1999/01/01 New 146-4080 Digital Multimeter Available For Troubleshooting Electronic Circuits{0115}
1999/01/01 EMCP II+ Has New Default Setpoints To Reduce Nuisance Shutdowns{4490,7451}
1999/01/01 Corrections To Special Instruction, REHS0181, Instructions For Mounting The Electronic Modular Control Panel II In A Remote Location{4490,7451}
1999/01/01 New Status Control Module (SCM) Provides Increased Engine Protection{7451}
1999/01/01 Procedures For Checking And Charging Hydrax Accumulator{1716}
1999/01/01 New Combustion Sensor Groups{1555}
1999/01/01 New Cable Tray Mounting Group Is Used In Conjunction With Treated Water Aftercooler Group{1408}
1999/01/01 Use 145-0316 Cleaning Kit For Gas Engine 2-Stage After Coolers{1350}
1999/01/01 Use 144-0235 Belt Tension Gauge To Check Belt Tension{7461,1357}
1999/02/01 Improved Cylinder Head Groups For G3400 Engines{1100,1101}
1999/02/01 Bearing Specifications For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Drive Group{1714}
1999/02/01 New Piston And Rod Groups Used{1214,1215}
1999/02/01 New Turbocharger Exhaust Coupling Used In Turbocharger Groups{1052,1061,1065}
1999/02/01 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fume Recirculation{1063}
1999/02/01 Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}
1999/02/01 161-3995 Oil Filter Spring Group Available To Increase Oil Filter Element Seating Force{1306}
1999/02/01 Use FT2613 Cap Assembly For Adjusting 7E-3407 Gas Regulator{1715}
1999/02/01 New Lines Groups Available To Eliminate Leakage In Air Piping{1058,1071}
1999/02/01 New Exhaust Manifold Shield Assemblies Provide Increased Heat Protection For Wastegate Area{1067}
1999/02/01 Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface Inspection{1101}