1999/01/01 Caterpillar

Use 144-0235 Belt Tension Gauge To Check Belt Tension{7461,1357}

Usage:

All Models

Warranty: S

Features/Benefits

* Used to check tension of belts driving components such as air compressor, air conditioning compressor, alternator, water pump, or other belt-driven attachments

* Works on "A" section belts with top width of 9.0 to 13.0 mm (.37 to .50 in) and "K" section poly-v, 4, 5, and 6 rib belts

* Increased accuracy is provided by a belt thickness compensating feature

* Has a permanent dial decal

Specifications/Technical Information

Height/width - 102 x 203 mm (4.0 x 8.0 in)

Leg span - 82.6 mm (3.25 in)

Weight - 400 g (14 oz)

Accuracy - ±10%

Range - 130 to 800 Newtons (30 to 180 lbs)

144-0235 Belt Tension Gauge

Caterpillar Information System:

1999/01/01 Use 145-9342 Filter Crusher to Reduce Waste And Collect Oil{5720}

1999/01/01 Use 9U-5968 Hydrostatic Filter Group To Filter Contaminanted Oil{5050,3200,3218}

1999/01/01 Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView{1000,3000,4000,5000,6000}

1999/01/01 Use 131-5050 DataView Group and 131-5051 DataView Portable TechStation Group For Accurate Diagnostics{1000,3000,4000,5000,6000,0788}

1999/01/01 Use 149-5138 Mechanical Push/Puller For Extra Force In General Purpose Applications{0700}

1999/01/01 New 146-4080 Digital Multimeter Available For Troubleshooting Electronic Circuits{0115}

1999/01/01 EMCP II+ Has New Default Setpoints To Reduce Nuisance Shutdowns{4490,7451}

1999/01/01 Corrections To Special Instruction, REHS0181, Instructions For Mounting The Electronic Modular Control Panel II In A Remote Location{4490,7451}

1999/01/01 New Status Control Module (SCM) Provides Increased Engine Protection{7451}

1999/01/01 Procedures For Checking And Charging Hydrax Accumulator{1716}

1999/01/01 New Combustion Sensor Groups{1555}

1999/01/01 New Cable Tray Mounting Group Is Used In Conjunction With Treated Water Aftercooler Group{1408}

1999/02/01 Improved Cylinder Head Groups For G3400 Engines{1100,1101}

1999/02/01 Bearing Specifications For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Drive Group{1714}

1999/02/01 New Piston And Rod Groups Used{1214,1215}

1999/02/01 New Turbocharger Exhaust Coupling Used In Turbocharger Groups{1052,1061,1065}

1999/02/01 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fume Recirculation{1063}

1999/02/01 Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}

1999/02/01 161-3995 Oil Filter Spring Group Available To Increase Oil Filter Element Seating Force{1306}

1999/02/01 Use FT2613 Cap Assembly For Adjusting 7E-3407 Gas Regulator{1715}

1999/02/01 New Lines Groups Available To Eliminate Leakage In Air Piping{1058,1071}

1999/02/01 New Exhaust Manifold Shield Assemblies Provide Increased Heat Protection For Wastegate Area{1067}

1999/02/01 Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface Inspection{1101}

1999/02/01 New Prechamber Assembly And Ignition Body Assembly In Prechamber Groups{1106}