1999/02/01 Caterpillar


New Relief Valves Used In Prelube Lines Groups And Starting Motor Air Pressure Regulator Groups{1451,1469}

Usage:


G3606 (3XF209-Up),
G3608 (4WF113-Up),
G3612 (1YG173-Up),
G3616 (4CG125-Up) Engines

Description of Change: New pressure relief valves are used in the prelube air lines groups and in the starting motor air pressure regulator groups on these engines. The new relief valves provide improved sealing of vent gases during relief conditions. The new relief valves mount in the same location as the former relief valves. The new relief valve requires additional support bracketing when used in the prelube motor air lines groups.

Adaptable To: Chart A identifies the new and former relief valves, the group that includes the new relief valve, the application and the relief valve setting. The new relief valves are in effect as listed above.

Illustration 1 and Chart B identify the components required to install the 165-7805 Relief Valve in the 119-7537 Prelube Air Lines Group.


Illustration 1. Identification of the components required to install the 165-7805 Relief Valve in the 119-7537 Prelube Air Lines Group.

Illustration 2 and Chart C identify the components required to install the 165-7805 Relief Valve in the 119-7536 Prelube Air Lines Group.


Illustration 2. Identification of the components required to install the 165-7805 Relief Valve in the 119-7536 Prelube Air Lines Group.

Caterpillar Information System:

1999/02/01 Extended Life Coolant (ELC) Now Preferred For 3600 Diesel Engines{1395}
1999/02/01 New Intermittent Prelube Basic Pump Group And Bracket Assembly Used{1319}
1999/02/01 Crankshaft Oil Passage Plugs Should Be Checked For Tightness On Some Crankshafts At Engine Overhauls{1202}
1999/02/01 New Thicker Jacket Water Side Cover Help Prevent Coolant Leaks{1201}
1999/02/01 New Cylinder Head Gaskets (Combustion Rings) Available{1124}
1999/02/01 New Prechamber Assembly And Ignition Body Assembly In Prechamber Groups{1106}
1999/02/01 Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface Inspection{1101}
1999/02/01 New Exhaust Manifold Shield Assemblies Provide Increased Heat Protection For Wastegate Area{1067}
1999/02/01 New Lines Groups Available To Eliminate Leakage In Air Piping{1058,1071}
1999/02/01 Use FT2613 Cap Assembly For Adjusting 7E-3407 Gas Regulator{1715}
1999/02/01 161-3995 Oil Filter Spring Group Available To Increase Oil Filter Element Seating Force{1306}
1999/02/01 Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}
1999/02/01 New Valve Improves Fuel Pressure Regulator Adjustment On 3600 Diesel Engines{1715}
1999/02/01 New Woodward EGB13P Reverse Acting Actuator Assembly{1716}
1999/02/01 Improvements Made On Gas Engine Wiring Groups{1900,1907}
1999/02/01 Woodward Hand Held Programmers (Control Programmers) Available For Use With Woodward 700 Series Controllers (Governor Control Groups){1930,1908}
1999/02/01 Particle Sensor Group Improved{7430}
1999/02/01 Caterpillar Now Has Parts Support For Previously Non-Supported Custom Parts{7567}
1999/02/01 Use 152-7143 Cable Assembly For Flash-Programming Generator Status Control Module{4450}
1999/03/01 New Top Piston Rings Available {1215}
1999/03/01 Use 170-9227 Reamer Shims To Aid In Reaming 3100 Engine Injector Sleeves {1250}
1999/03/01 New Piston With 4 mm Wide Oil Ring Reduces Light Load Oil Consumption {1214,1215,1225}
1999/03/01 Use 145-5247 And 147-2675 Wear Sleeve Installer To Install Crankshaft Wear Sleeves {1202}
1999/03/01 New Flywheel Housing Gasket For 3406 Engines {1157}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.