Woodward Hand Held Programmers (Control Programmers) Available For Use With Woodward 700 Series Controllers (Governor Control Groups){1930,1908}
Usage:
3606 (8RB),
3608 (6MC),
3612 (9RC, 9FR),
3616 (1PD, 1FN) Engines
Woodward Hand Held Programmers (Control Programmers) are available to work with Woodward 700 Series Electronic Governors (Governor Control Groups). The chart identifies which Control Programmer works with which Governor Control Group.
Caterpillar Information System:
1999/02/01 Improvements Made On Gas Engine Wiring Groups{1900,1907}
1999/02/01 New Woodward EGB13P Reverse Acting Actuator Assembly{1716}
1999/02/01 New Valve Improves Fuel Pressure Regulator Adjustment On 3600 Diesel Engines{1715}
1999/02/01 New Relief Valves Used In Prelube Lines Groups And Starting Motor Air Pressure Regulator Groups{1451,1469}
1999/02/01 Extended Life Coolant (ELC) Now Preferred For 3600 Diesel Engines{1395}
1999/02/01 New Intermittent Prelube Basic Pump Group And Bracket Assembly Used{1319}
1999/02/01 Crankshaft Oil Passage Plugs Should Be Checked For Tightness On Some Crankshafts At Engine Overhauls{1202}
1999/02/01 New Thicker Jacket Water Side Cover Help Prevent Coolant Leaks{1201}
1999/02/01 New Cylinder Head Gaskets (Combustion Rings) Available{1124}
1999/02/01 New Prechamber Assembly And Ignition Body Assembly In Prechamber Groups{1106}
1999/02/01 Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface Inspection{1101}
1999/02/01 New Exhaust Manifold Shield Assemblies Provide Increased Heat Protection For Wastegate Area{1067}
1999/02/01 Particle Sensor Group Improved{7430}
1999/02/01 Caterpillar Now Has Parts Support For Previously Non-Supported Custom Parts{7567}
1999/02/01 Use 152-7143 Cable Assembly For Flash-Programming Generator Status Control Module{4450}
1999/03/01 New Top Piston Rings Available {1215}
1999/03/01 Use 170-9227 Reamer Shims To Aid In Reaming 3100 Engine Injector Sleeves {1250}
1999/03/01 New Piston With 4 mm Wide Oil Ring Reduces Light Load Oil Consumption {1214,1215,1225}
1999/03/01 Use 145-5247 And 147-2675 Wear Sleeve Installer To Install Crankshaft Wear Sleeves {1202}
1999/03/01 New Flywheel Housing Gasket For 3406 Engines {1157}
1999/03/01 Use 132-8263 Spanner Wrench To Remove And Install Terminal Assembly In Electronic Ignition System (EIS) Transformer Group {0712,1409}
1999/03/01 New Engine Pressure Sensors Available {1916,1917,1922,1923,1924}
1999/03/01 Use 146-2727 Tool Group To Monitor And Check Engine Performance On 3600 Engines {1000}
1999/03/01 New "Long Core" Aftercooler Provides Improved High Ambient Temperature Performance {1064}