1998/11/01 Caterpillar


New Prechamber Group Used {1106}

Usage:


G3612 (1YG),
G3616 (4CG) Engines

SUPPLEMENT: DECEMBER 1998

Engine News SEBD9266 Article 21, Page 22, November 1998; "New Prechamber Group Used".

The chart in the article incorrectly identifies Item 6 as a 5P-5889 Seal. The correct Part Number for Item 6 is a 5P-4889 Seal.

--------------- END SUPPLEMENT ---------------

Description of Change: A new prechamber group is being used on G3612 and G3616 high efficiency (10.5:1 and 11:1 compression ratio) engines. This new group includes a new prechamber assembly that has a higher operating temperature and increased resistance to oxidation.

Adaptable To: The illustration and chart identify the components of the new 125-3805 Prechamber Group. This new group is effective with G3612 (1YG156-Up) and G3616 (4CG115-Up) High Efficiency Engines. The new components of this group, when used together, are adaptable to all earlier G3612 (1YG) and G3616 (4CG) High Efficiency Engines.


Components of the new 125-3805 Prechamber Group.

Caterpillar Information System:

1998/11/01 Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1998/11/01 New Air Cleaner Parts Available {1051}
1998/11/01 New Gas Admission Valve (GAV) Lash Tool Available {0600,1105,1121}
1998/11/01 New Valve Recession Tool Kit Available {0600,1105,1121}
1998/11/01 Using The Proper Wiring Schematics For Troubleshooting {7566}
1998/11/01 New 162-7662 Instrument Box Assembly Now Available {7451}
1998/11/01 Cooling System Thermostat To Be Replaced At 6,000 Hours {1355}
1998/11/01 Service Instructions For 7C-3018 Governor Orifice {1264}
1998/11/01 New Idler Gear Assembly For The Front Gear Group In G3500 Engines {1234}
1998/11/01 New Connecting Rod Assembly Provides Increased Rod Eye Bushing Retention {1218}
1998/11/01 New High Inertia Camshaft Drive Gear Available {1212}
1998/11/01 New Valve Seat Inserts For Field Rework {1103}
1998/11/01 Improved 128-5113 Thread Repair Insert Available For Cylinder Blocks With Damaged Stud Threads {1201}
1998/11/01 7E-7064 Camshaft Journal Available For Use When Replacing Former Camshaft Segment With Current Thick Flange Design {1210}
1998/11/01 New Oil Pan For 3616 Marine Engines {1302}
1998/11/01 New Repair Seal Kit Available {1309}
1998/11/01 New 160-9912 Integral Seal Used For Ignition Coils In Ignition Groups {1554}
1998/11/01 Personality Module Alarm And Shutdown Settings {1902}
1998/11/01 Special Instruction, REHS0345, "Generator Service Literature Index" Is Available {4450}
1998/11/01 Two Bearing Close Coupled Gensets Experience A Noise In The Coupling During Engine Shut Down {4456}
1998/12/01 New Remanufactured Water Pump Groups Available{1361}
1998/12/01 Be Sure To Use Correct Stub Shaft When Replacing Cam Idler Gear{1234,1212}
1998/12/01 Eliminate Possibility Of Engine Oil Leaks From Oil Pan Bolt{1302}
1998/12/01 New Piston Cooling Jet Tube Assemblies Provide Increased Piston Clearance For Engines With Gallery Cooled Pistons{1331}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.