New 160-9912 Integral Seal Used For Ignition Coils In Ignition Groups {1554}
Usage:
G3606 (3XF189-Up),
G3608 (4WF102-Up),
G3612 (1YG157-Up),
G3616 (4CG116-Up) Engines
Description of Change: The new integral seal meets Canadian Standard Association (CSA) requirements while maintaining an effective seal against water entry into the ignition system.
Adaptable To: The new 160-9912 Integral Seal is a part of the 146-4287, 146-4288, 146-4289, and 142-4290 Ignition Groups. The new 160-9912 Integral Seal replaces the former 7W-5215 Gasket effective with the serial numbers listed above. The new seal is adaptable to all G3606 (3XF), G3608 (4WF), G3612 (1YG), and G3616 (4CG) Engines.
Caterpillar Information System:
1998/11/01 New Repair Seal Kit Available {1309}
1998/11/01 New Oil Pan For 3616 Marine Engines {1302}
1998/11/01 7E-7064 Camshaft Journal Available For Use When Replacing Former Camshaft Segment With Current Thick Flange Design {1210}
1998/11/01 Improved 128-5113 Thread Repair Insert Available For Cylinder Blocks With Damaged Stud Threads {1201}
1998/11/01 New Prechamber Group Used {1106}
1998/11/01 Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1998/11/01 New Air Cleaner Parts Available {1051}
1998/11/01 New Gas Admission Valve (GAV) Lash Tool Available {0600,1105,1121}
1998/11/01 New Valve Recession Tool Kit Available {0600,1105,1121}
1998/11/01 Using The Proper Wiring Schematics For Troubleshooting {7566}
1998/11/01 New 162-7662 Instrument Box Assembly Now Available {7451}
1998/11/01 Cooling System Thermostat To Be Replaced At 6,000 Hours {1355}
1998/11/01 Personality Module Alarm And Shutdown Settings {1902}
1998/11/01 Special Instruction, REHS0345, "Generator Service Literature Index" Is Available {4450}
1998/11/01 Two Bearing Close Coupled Gensets Experience A Noise In The Coupling During Engine Shut Down {4456}
1998/12/01 New Remanufactured Water Pump Groups Available{1361}
1998/12/01 Be Sure To Use Correct Stub Shaft When Replacing Cam Idler Gear{1234,1212}
1998/12/01 Eliminate Possibility Of Engine Oil Leaks From Oil Pan Bolt{1302}
1998/12/01 New Piston Cooling Jet Tube Assemblies Provide Increased Piston Clearance For Engines With Gallery Cooled Pistons{1331}
1998/12/01 New Engine Lifting Eye Assembly {1122}
1998/12/01 Change In Location And Size Of Crankshaft Counterweight Sequence Number{1231,1202}
1998/12/01 New Customer Communication Module Has Improved Communication Capabilities{1926}
1998/12/01 Updated Owners Manual For Customer Communication Module (CCM) Available{1926}
1998/12/01 Service Manual Module For Electronic Modular Control Panel II+ On EUI Engines Now Available{7450,4490}