1998/11/01 Caterpillar


New Repair Seal Kit Available {1309}

Usage:


3606 (8RB),
3608 (6MC),
3612 (9RC, 9FR),
3616 (1PD, 1FN),
G3606 (3XF),
G3608 (4WF),
G3612 (1YG),
G3616 (4CG) Engines

Description of Change: A new repair seal kit is available to service the pilot operated valve on the above engines. The new seal kit contains five O-ring seals including a new expander O-ring. This new expander O-ring (1) is shown in the illustration below and will prevent low pressure leaking of oil through the vent hole.

Adaptable To: The new 169-5428 Repair Seal Kit cancels and replaces the former 6I-0383 Repair Seal Kit. This new 169-5428 Repair Seal Kit can be used to service the 7E-5038 Pilot Operated Valve. The 7E-5038 Pilot Operated Valve is used in the following Oil Lines Groups:

* 7E-5042
* 7E-5043
* 7E-6212
* 7E-6213
* 7E-7090
* 118-7291
* 152-6249
* 152-9865


Illustration 1.
New 169-5428 Repair Seal Kit with expander O-ring included (1).

Caterpillar Information System:

1998/11/01 New Oil Pan For 3616 Marine Engines {1302}
1998/11/01 7E-7064 Camshaft Journal Available For Use When Replacing Former Camshaft Segment With Current Thick Flange Design {1210}
1998/11/01 Improved 128-5113 Thread Repair Insert Available For Cylinder Blocks With Damaged Stud Threads {1201}
1998/11/01 New Prechamber Group Used {1106}
1998/11/01 Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1998/11/01 New Air Cleaner Parts Available {1051}
1998/11/01 New Gas Admission Valve (GAV) Lash Tool Available {0600,1105,1121}
1998/11/01 New Valve Recession Tool Kit Available {0600,1105,1121}
1998/11/01 Using The Proper Wiring Schematics For Troubleshooting {7566}
1998/11/01 New 162-7662 Instrument Box Assembly Now Available {7451}
1998/11/01 Cooling System Thermostat To Be Replaced At 6,000 Hours {1355}
1998/11/01 Service Instructions For 7C-3018 Governor Orifice {1264}
1998/11/01 New 160-9912 Integral Seal Used For Ignition Coils In Ignition Groups {1554}
1998/11/01 Personality Module Alarm And Shutdown Settings {1902}
1998/11/01 Special Instruction, REHS0345, "Generator Service Literature Index" Is Available {4450}
1998/11/01 Two Bearing Close Coupled Gensets Experience A Noise In The Coupling During Engine Shut Down {4456}
1998/12/01 New Remanufactured Water Pump Groups Available{1361}
1998/12/01 Be Sure To Use Correct Stub Shaft When Replacing Cam Idler Gear{1234,1212}
1998/12/01 Eliminate Possibility Of Engine Oil Leaks From Oil Pan Bolt{1302}
1998/12/01 New Piston Cooling Jet Tube Assemblies Provide Increased Piston Clearance For Engines With Gallery Cooled Pistons{1331}
1998/12/01 New Engine Lifting Eye Assembly {1122}
1998/12/01 Change In Location And Size Of Crankshaft Counterweight Sequence Number{1231,1202}
1998/12/01 New Customer Communication Module Has Improved Communication Capabilities{1926}
1998/12/01 Updated Owners Manual For Customer Communication Module (CCM) Available{1926}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.