1998/11/01 Caterpillar


Service Instructions For 7C-3018 Governor Orifice {1264}

Usage:


G3508 (2JF, 4WD, 9AW, 9TG);
G3512 (4KC, 5JD, 6JW, 7NJ, 7SZ);
G3516 (3RC, 4EK, 5PN, 8LD, 8PW) Engines

Reference: Engine News; December 1997, Page 4 "New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply"

Description of Change: The basic governor groups for G3500 Engines contain an orifice. This orifice acts as a filter for the oil entering the governor from the engine oil supply. Engine oil debris from normal engine wear can damage the governor if the orifice is not functioning properly. To ensure that the governor will function properly, the orifice must be replaced every 7500 hours or once a year.

Adaptable To: The 7C-3018 Orifice is used in 3161 Governors that do not have a self-contained oil supply.


Location of 7C-3018 Orifice (1) in basic governor groups for G3500 Engines.

Caterpillar Information System:

1998/11/01 New Idler Gear Assembly For The Front Gear Group In G3500 Engines {1234}
1998/11/01 New Connecting Rod Assembly Provides Increased Rod Eye Bushing Retention {1218}
1998/11/01 New High Inertia Camshaft Drive Gear Available {1212}
1998/11/01 New Valve Seat Inserts For Field Rework {1103}
1998/11/01 The New 155-1536 Valve Recession Tool Kit Has Been Released {0701,1105}
1998/11/01 Required Information For Parts Return {7760}
1998/11/01 Compensator And Socket Head Bolts For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Pump Now Available {1714}
1998/11/01 New Engine Oil Reservoir Groups Are Now Available {1308}
1998/11/01 Correction To Service Manual For Connecting Rod Bolt Torque {1218}
1998/11/01 Water Pump Gasket For Emissions Engines Not Clearly Identified In Parts Manual {1361}
1998/11/01 Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/01 O-Ring Seal For Fuel Injection Pump Groups Is Now Serviced {1251}
1998/11/01 Cooling System Thermostat To Be Replaced At 6,000 Hours {1355}
1998/11/01 New 162-7662 Instrument Box Assembly Now Available {7451}
1998/11/01 Using The Proper Wiring Schematics For Troubleshooting {7566}
1998/11/01 New Valve Recession Tool Kit Available {0600,1105,1121}
1998/11/01 New Gas Admission Valve (GAV) Lash Tool Available {0600,1105,1121}
1998/11/01 New Air Cleaner Parts Available {1051}
1998/11/01 Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1998/11/01 New Prechamber Group Used {1106}
1998/11/01 Improved 128-5113 Thread Repair Insert Available For Cylinder Blocks With Damaged Stud Threads {1201}
1998/11/01 7E-7064 Camshaft Journal Available For Use When Replacing Former Camshaft Segment With Current Thick Flange Design {1210}
1998/11/01 New Oil Pan For 3616 Marine Engines {1302}
1998/11/01 New Repair Seal Kit Available {1309}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.