Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
Usage:
All 3054 And 3056 Industrial And Generator Set Engines
Description of Change: All Stanadyne fuel injection pumps that are used on 3054 and 3056 Industrial and Generator Set Engines are now equipped with tamper resistant fittings. A new tool has been released for use with the tamper resistant fittings.
Adaptable To: 154-7151 Bolt Remover Kit is now available for use with the tamper resistant fittings. Contact your Caterpillar dealer for more information.
Caterpillar Information System:
1998/11/01 O-Ring Seal For Fuel Injection Pump Groups Is Now Serviced {1251}
1998/10/01 Corrections To Service Manual Module, SENR5359, SR4B Generator Service Manual{4450}
1998/10/01 3600 Diesel Marine Monitoring System (MMS) Electrical System Schematic Now Available{7451,7490}
1998/10/01 New Valve Improves Fuel Pressure Regulator Adjustment On 3600 Diesel Engines{1715}
1998/10/01 New Combustion Sensor Groups{1555}
1998/10/01 Premium Wire Harness Schematics Are Now Available{1408}
1998/10/01 New Stronger Oil Filter Base Used In Oil Filter Groups{1306}
1998/10/01 3600 Engines Shipped With Oil in the Actuators{1265}
1998/10/01 Limited Number Of 105-4365 Electronic Actuator Groups Remain In Parts System{1250}
1998/10/01 3600 High Exhaust Temperature Guided Diagnostics Available In SIS{0372}
1998/10/01 New Gear And New Shaft Assemblies Used In Scavenge Oil Pump Groups{1312}
1998/10/01 Oil Filter Groups For All Commercial 3500 Series Engines Have Been Improved{1306}
1998/11/01 Water Pump Gasket For Emissions Engines Not Clearly Identified In Parts Manual {1361}
1998/11/01 Correction To Service Manual For Connecting Rod Bolt Torque {1218}
1998/11/01 New Engine Oil Reservoir Groups Are Now Available {1308}
1998/11/01 Compensator And Socket Head Bolts For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Pump Now Available {1714}
1998/11/01 Required Information For Parts Return {7760}
1998/11/01 The New 155-1536 Valve Recession Tool Kit Has Been Released {0701,1105}
1998/11/01 New Valve Seat Inserts For Field Rework {1103}
1998/11/01 New High Inertia Camshaft Drive Gear Available {1212}
1998/11/01 New Connecting Rod Assembly Provides Increased Rod Eye Bushing Retention {1218}
1998/11/01 New Idler Gear Assembly For The Front Gear Group In G3500 Engines {1234}
1998/11/01 Service Instructions For 7C-3018 Governor Orifice {1264}
1998/11/01 Cooling System Thermostat To Be Replaced At 6,000 Hours {1355}