1998/10/01 Caterpillar


Limited Number Of 105-4365 Electronic Actuator Groups Remain In Parts System{1250}

Usage:


G3606 (3XF1-113),
G3608 (4WF1-67),
G3612 (7YG1-123),
G3516 (4CG1-82) Engines

The 105-4365 Electronic Actuator Group will not be available for parts service after January 1, 1999. A limited number of these actuator groups are still available for parts service. These actuator groups may be purchased as spare parts for those applications still using 105-4365 Electronic Actuator Groups.

NOTE: It is Caterpillar's recommendation that engines still using the 105-4365 Electronic Actuator Group be upgraded to the Hydrax System. The Hydrax System is the current production system. A major advantage of the Hydrax System is lower maintenance cost.

If you are looking for spare actuators for support after January 1999, please contact your Large Engine Center (LEC) Customer Service Representative.

Caterpillar Information System:

1998/10/01 3600 High Exhaust Temperature Guided Diagnostics Available In SIS{0372}
1998/10/01 New Gear And New Shaft Assemblies Used In Scavenge Oil Pump Groups{1312}
1998/10/01 Oil Filter Groups For All Commercial 3500 Series Engines Have Been Improved{1306}
1998/10/01 New Spacer Plate Gasket Provides Improved Sealing{1221}
1998/10/01 New Connecting Rod Assembly Provides Increased Rod Eye Bushing Retention{1218}
1998/10/01 New High Inertia Camshaft Drive Gear Available{1212}
1998/10/01 New Seal Assembly Used In Turbocharger Group{1052}
1998/10/01 New Coil Kits Replace Shielded Transformer{1554,1561}
1998/10/01 New Carburetor Assembly For G300 Series Engines{1266}
1998/10/01 Flash File Bulletin Board System To Be Discontinued{1920}
1998/10/01 New Injector Sleeve Bore Gauge And Tube Brush Available For Injector Sleeve Bore; New Grommet Available For Unit Injector Electrical Connection{1713,1290}
1998/10/01 New Seawater Pump Manifold Improves Priming{1371}
1998/10/01 3600 Engines Shipped With Oil in the Actuators{1265}
1998/10/01 New Stronger Oil Filter Base Used In Oil Filter Groups{1306}
1998/10/01 Premium Wire Harness Schematics Are Now Available{1408}
1998/10/01 New Combustion Sensor Groups{1555}
1998/10/01 New Valve Improves Fuel Pressure Regulator Adjustment On 3600 Diesel Engines{1715}
1998/10/01 3600 Diesel Marine Monitoring System (MMS) Electrical System Schematic Now Available{7451,7490}
1998/10/01 Corrections To Service Manual Module, SENR5359, SR4B Generator Service Manual{4450}
1998/11/01 O-Ring Seal For Fuel Injection Pump Groups Is Now Serviced {1251}
1998/11/01 Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/01 Water Pump Gasket For Emissions Engines Not Clearly Identified In Parts Manual {1361}
1998/11/01 Correction To Service Manual For Connecting Rod Bolt Torque {1218}
1998/11/01 New Engine Oil Reservoir Groups Are Now Available {1308}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.