New Seal Assembly Used In Turbocharger Group{1052}
Usage:
G3516 (4EK) Engines
Description of Change: A new high temperature resistant seal assembly is used on the turbocharger group for low energy fuel applications with dry exhaust manifolds. This new seal assembly goes between the exhaust manifold (A) and the turbocharger turbine housing (B).
Location of the new 161-3508 Seal Assembly (1) in the 152-6407 Turbocharger Group.
Adaptable To: The new 161-3508 Seal Assembly replaces the former 121-5736 Gasket in the 152-6407 Turbocharger Group. Two new 161-3508 Seal Assemblies are required for each turbocharger group. The 161-3508 Seal Assembly includes two serviceable components:
-
- * A 161-3506 Seal.
- * A 161-3507 Plate.
- * A 161-3506 Seal.
Caterpillar Information System:
1998/10/01 New Coil Kits Replace Shielded Transformer{1554,1561}
1998/10/01 New Carburetor Assembly For G300 Series Engines{1266}
1998/10/01 Flash File Bulletin Board System To Be Discontinued{1920}
1998/10/01 New Injector Sleeve Bore Gauge And Tube Brush Available For Injector Sleeve Bore; New Grommet Available For Unit Injector Electrical Connection{1713,1290}
1998/10/01 New Seawater Pump Manifold Improves Priming{1371}
1998/10/01 Improved 133-9096 Diaphragm Assembly Available For Catalyst Engines{1266}
1998/10/01 Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/09/01 Fabricated Spark Plug Gapping Tool {0766,1555}
1998/09/01 New Cylinder Liner Sleeve Used {1216}
1998/09/01 New Exhaust Valves Have Improved Resistance To Radial Cracking {1105}
1998/09/01 3600 Diesel Marine Monitoring System Owner's Manual Has Been Revised {0374}
1998/09/01 Turbocharger Vent Lines Important For Engine Reliability {1380}
1998/10/01 New High Inertia Camshaft Drive Gear Available{1212}
1998/10/01 New Connecting Rod Assembly Provides Increased Rod Eye Bushing Retention{1218}
1998/10/01 New Spacer Plate Gasket Provides Improved Sealing{1221}
1998/10/01 Oil Filter Groups For All Commercial 3500 Series Engines Have Been Improved{1306}
1998/10/01 New Gear And New Shaft Assemblies Used In Scavenge Oil Pump Groups{1312}
1998/10/01 3600 High Exhaust Temperature Guided Diagnostics Available In SIS{0372}
1998/10/01 Limited Number Of 105-4365 Electronic Actuator Groups Remain In Parts System{1250}
1998/10/01 3600 Engines Shipped With Oil in the Actuators{1265}
1998/10/01 New Stronger Oil Filter Base Used In Oil Filter Groups{1306}
1998/10/01 Premium Wire Harness Schematics Are Now Available{1408}
1998/10/01 New Combustion Sensor Groups{1555}
1998/10/01 New Valve Improves Fuel Pressure Regulator Adjustment On 3600 Diesel Engines{1715}