Improved 133-9096 Diaphragm Assembly Available For Catalyst Engines{1266}
Usage:
G3304 (37Y),
G3306 (07Y) Engines
A new 133-9096 Diaphragm Assembly has been released for the basic carburetor groups on these engines. The new diaphragm is necessary for the engines to attain stoichiometric conditions when operating with a catalytic convertor.
Caterpillar Information System:
1998/10/01 Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/09/01 Fabricated Spark Plug Gapping Tool {0766,1555}
1998/09/01 New Cylinder Liner Sleeve Used {1216}
1998/09/01 New Exhaust Valves Have Improved Resistance To Radial Cracking {1105}
1998/09/01 3600 Diesel Marine Monitoring System Owner's Manual Has Been Revised {0374}
1998/09/01 Turbocharger Vent Lines Important For Engine Reliability {1380}
1998/09/01 Some Benefits Of The New 146-2588 Spark Plug {1555}
1998/09/01 New Gear And New Shaft Assemblies Used In Scavenge Oil Pump Groups {1312}
1998/09/01 Non-E-Trim Unit Injectors No Longer Produced For 3500B Engines {1290}
1998/09/01 New Spacer Plate Gasket Provides Improved Sealing {1221}
1998/09/01 Recommended Lubrication And Torque Procedure For Connecting Rod Bolts {1218}
1998/09/01 Recommended Lubrication And Torque Procedure For Main Bearing Cap Bolts {1203}
1998/10/01 New Seawater Pump Manifold Improves Priming{1371}
1998/10/01 New Injector Sleeve Bore Gauge And Tube Brush Available For Injector Sleeve Bore; New Grommet Available For Unit Injector Electrical Connection{1713,1290}
1998/10/01 Flash File Bulletin Board System To Be Discontinued{1920}
1998/10/01 New Carburetor Assembly For G300 Series Engines{1266}
1998/10/01 New Coil Kits Replace Shielded Transformer{1554,1561}
1998/10/01 New Seal Assembly Used In Turbocharger Group{1052}
1998/10/01 New High Inertia Camshaft Drive Gear Available{1212}
1998/10/01 New Connecting Rod Assembly Provides Increased Rod Eye Bushing Retention{1218}
1998/10/01 New Spacer Plate Gasket Provides Improved Sealing{1221}
1998/10/01 Oil Filter Groups For All Commercial 3500 Series Engines Have Been Improved{1306}
1998/10/01 New Gear And New Shaft Assemblies Used In Scavenge Oil Pump Groups{1312}
1998/10/01 3600 High Exhaust Temperature Guided Diagnostics Available In SIS{0372}