Usage:
NOTE: Check the condition of all O-ring seals and of all parts. If any components are worn or damaged, use new parts for replacement.
1. Put the accumulator charging valve assembly in position on the rear frame, as shown. Install two bolts (6) and the washers that hold brake accumulator charging valve assembly (5) to the rear frame.
2. Connect two hose assemblies (9) to valve assembly (5).
3. Connect hose assemblies (7), (8), (10) and (11) to valve assembly (5).
4. Connect hose assemblies (3) and (4) to valve assembly (5).
5. Connect electrical connectors (1) and (2) to valve assembly (5).
6. Purge the air from the service brakes. Refer to Systems Operation, Testing and Adjusting, Braking System, "Brake System Air - Purge" for the machine that is being serviced.
End By:
a. Remove the steering frame lock pin. Refer to Disassembly and Assembly, "Steering Frame Lock Pin - Remove and Install" for the machine that is being serviced.