An Outboard Bearing Kit is Now Available for Integrated Throttle Body (ITB) on Certain G3500 Engines {1265, 1269} Caterpillar


An Outboard Bearing Kit is Now Available for Integrated Throttle Body (ITB) on Certain G3500 Engines {1265, 1269}

Usage:

G3516 4EK
Engine
G3508 (S/N: 9TG1-UP; WPM1-UP; WPN1-UP; DLR1-UP)
G3508B (S/N: JB31-UP; N8C1-UP; RBK1-UP)
G3508J (S/N: N8W1-UP)
G3512 (S/N: 7NJ1-UP; E2N1-UP; E2P1-UP; WPP1-UP; WPR1-UP; E2S1-UP; GNS1-UP; E2T1-UP; E2X1-UP)
G3512B (S/N: JHH1-UP; N2S1-UP; JBW1-UP)
G3512E (S/N: NWC1-UP; GFM1-UP; SSR1-UP; NGS1-UP; SST1-UP)
G3516 (S/N: AL71-UP; ZBA1-UP; L6E1-UP; L6G1-UP; 4EK1-UP; WPS1-UP; CSZ1-UP)
G3516B (S/N: CW51-UP; N6E1-UP; JEF1-UP)
G3516C (S/N: GG31-UP; NG61-UP; GSB1-UP; TJB1-UP; GZC1-UP; TJC1-UP; F6D1-UP; NWD1-UP; F6E1-UP; G7E1-UP; NWE1-UP; F6F1-UP; NWF1-UP; F6M1-UP; N6R1-UP; GZZ1-UP)
G3516E (S/N: F6G1-UP; NWG1-UP; GAS1-UP; SLY1-UP)
G3516J (S/N: N6W1-UP)
G3520 (S/N: HET1-UP)
G3520B (S/N: GLF1-UP; GET1-UP)
G3520C (S/N: GZA1-UP; HEA1-UP; GZB1-UP; HEB1-UP; MAD1-UP; GZJ1-UP; GZK1-UP; GZL1-UP; GZM1-UP; GZN1-UP; B9P1-UP; RLP1-UP; LGS1-UP; HAT1-UP; CWW1-UP; CWY1-UP)
G3520E (S/N: GZE1-UP; GZG1-UP; GZH1-UP; HAL1-UP; SXY1-UP)
G3520J (S/N: N221-UP; N241-UP)
Petroleum Engine
G3520B PETROLEUM (S/N: TPC1-UP)
Power Module
PMG3516 (S/N: GJK1-UP; JKK1-UP)

------ WARNING! ------

Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.


The bearings are now serviceable. The 555-1602 Bearing Kit has been released.

Refer to Special Instruction, M0095303 for the removal and installation procedure.

Caterpillar Information System:

A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202} A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202} A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Sensor Signal (PWM) - Test
C9.3B Industrial Engines Inlet Manifold - Install
C175 Petroleum Engine Fuel Rail Pressure Is High
140 Motor Grader Systems Secondary Steering System
140 Motor Grader Systems Location of Components (Steering System)
140 Motor Grader Systems General Information (Steering System)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder
140 Motor Grader Systems Control Valve (All Wheel Drive)
Procedure to Replace the Glass of the Cab Right Side Window on All Next Generation Excavators {7310} Procedure to Replace the Glass of the Cab Right Side Window on All Next Generation Excavators {7310}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System General Information (Boom System)
G3512 Generator Set Engine Belt Guard - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Swing Speed and Overswing on Level Ground - Check
C27 Industrial Engine and C27 Locomotive Engine Diesel Oxidation Catalyst Warning System
C3.3B and C3.8 Engines for Caterpillar Built Machines Engine Injector Trim File - Install
C3.3B and C3.8 Engines for Caterpillar Built Machines DEF Injector Trim File - Install - Injector Trim Code - Install
Three60 Precision Controller Gen II Drag Setting (Control Lever) - Check/Adjust
Insulation on Exhaust Components for 3500 and C175 Machine Engines {1061} Insulation on Exhaust Components for 3500 and C175 Machine Engines {1061}
140 Motor Grader Systems General Information (Brake System)
140 Motor Grader Machine Systems Hydraulic Oil Cooler - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Swing Speed and Swing Drift on a Slope - Check
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Stick Cylinder - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.