Insulation on Exhaust Components for 3500 and C175 Machine Engines {1061}
- Caterpillar Products Machine Engines
- All 3500 Series
- All C175 Series
- Caterpillar Products Machine Engines
- All 3500 Series
- All C175 Series
Caterpillar does not recommend aftermarket insulation on the exhaust components. Damage to exhaust components has been reported for machine engines with aftermarket insulation on the exhaust manifold and/or on the turbocharger. Increased fuel, oil, and water temperatures have been reported.
In selected instances, Caterpillar may provide the insulation as an option from the factory. Ordering insulation as an option from the factory will ensure that the entire balance of heat of the engine is considered. The heat load will be addressed at the factory.
Caterpillar Information System:
Three60 Precision Controller Gen II Drag Setting (Control Lever) - Check/Adjust
C3.3B and C3.8 Engines for Caterpillar Built Machines DEF Injector Trim File - Install - Injector Trim Code - Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Engine Injector Trim File - Install
C27 Industrial Engine and C27 Locomotive Engine Diesel Oxidation Catalyst Warning System
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Swing Speed and Overswing on Level Ground - Check
320 GC, 320 and 323 Excavator Machine Systems Specifications
G3512 Generator Set Engine Belt Guard - Remove and Install
An Outboard Bearing Kit is Now Available for Integrated Throttle Body (ITB) on Certain G3500 Engines {1265, 1269} An Outboard Bearing Kit is Now Available for Integrated Throttle Body (ITB) on Certain G3500 Engines {1265, 1269}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202} A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202} A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Sensor Signal (PWM) - Test
C9.3B Industrial Engines Inlet Manifold - Install
140 Motor Grader Systems General Information (Brake System)
140 Motor Grader Machine Systems Hydraulic Oil Cooler - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Swing Speed and Swing Drift on a Slope - Check
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Stick Cylinder - Disassemble
G3512 Generator Set Engine Fan Drive - Remove and Install
C9.3B Industrial Engines Engine Oil Pump - Remove
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
C175 Petroleum Engine Fuel Flow Is High
C175 Petroleum Engine Electrical Power Supply - Test
C175 Petroleum Engine Exhaust Temperature - Test
794 AC Off-Highway Truck Field Assembly Engine Aftertreatment System - Install
C175 Petroleum Engine Exhaust Temperature Is High