Location of Components (Steering System)
Show/hide table
Illustration 1 | g06361036 |
(1) Implement and Steering Pump
(2) Combination Valve (3) Hand Metering Unit (HMU) (4) Left Steering Cylinder (5) Right Steering Cylinder (6) Secondary Steering Pump |
Show/hide table
Illustration 2 | g06361050 |
The implement and steering pump (1) is below the cab, driven by the front of the engine.
Show/hide table
Illustration 3 | g06361051 |
The combination valve (2) is attached to the left side of the implement and steering pump.
Show/hide table
Illustration 4 | g06361059 |
The hand metering unit (3) is inside the steering console. The steering wheel attaches to the input shaft of the HMU.
Show/hide table
Illustration 5 | g06361062 |
The left (4) and right (5) steering cylinders are on the front axle and connect to the wheel hubs.
Show/hide table
Illustration 6 | g06361053 |
The secondary steering pump (6) is on the left side of the machine, below the cab. The pump is attached to the front frame, in front of the articulation hitch.
Caterpillar Information System:
140 Motor Grader Systems General Information (Steering System)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder
140 Motor Grader Systems Control Valve (All Wheel Drive)
Procedure to Replace the Glass of the Cab Right Side Window on All Next Generation Excavators {7310} Procedure to Replace the Glass of the Cab Right Side Window on All Next Generation Excavators {7310}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System General Information (Boom System)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fan Drive Motor
140 Motor Graders Final Drive
320 GC, 320 and 323 Excavator Machine Systems Travel Motor - Test - Measurement of Case Drain Oil
320 GC, 320 and 323 Excavator Machine Systems Relief Valve (Crossover) - Test and Adjust
Improved Rocker Arm Assembly is Now Used on Certain C9.3 Machine Engines {1123} Improved Rocker Arm Assembly is Now Used on Certain C9.3 Machine Engines {1123}
Improved Rocker Arm Assembly is Now Used on Certain C9.3 Engines {1123} Improved Rocker Arm Assembly is Now Used on Certain C9.3 Engines {1123}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Travel on Level Ground - Test - Optional Test
140 Motor Grader Systems Secondary Steering System
C175 Petroleum Engine Fuel Rail Pressure Is High
C9.3B Industrial Engines Inlet Manifold - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Sensor Signal (PWM) - Test
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202} A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202} A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
An Outboard Bearing Kit is Now Available for Integrated Throttle Body (ITB) on Certain G3500 Engines {1265, 1269} An Outboard Bearing Kit is Now Available for Integrated Throttle Body (ITB) on Certain G3500 Engines {1265, 1269}
G3512 Generator Set Engine Belt Guard - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Swing Speed and Overswing on Level Ground - Check
C27 Industrial Engine and C27 Locomotive Engine Diesel Oxidation Catalyst Warning System
C3.3B and C3.8 Engines for Caterpillar Built Machines Engine Injector Trim File - Install