Lifter Group
Show/hide table
Illustration 1 | g06070157 |
Show/hide table
Specifications for 385-4313 Tappet | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
A | - | 385-4313 Tappet | Diameter of body is |
- | - | - | Bore diameter in the cylinder block is |
Caterpillar Information System:
Procedure For Restoration of Flywheel Lockout {4480} Procedure For Restoration of Flywheel Lockout {4480}
320 GC, 320 and 323 Excavator Work Tool Control (Two-Way Flow) - If Equipped
320 GC, 320 and 323 Excavator Joystick Controls Alternate Patterns
320 GC, 320 and 323 Excavator Work Tool Control (One-Way Flow) - If Equipped
320 GC, 320 and 323 Excavator SmartBoom Control - If Equipped
320 GC, 320 and 323 Excavator Joystick Controls - Medium Pressure (If Equipped)
320 GC, 320 and 323 Excavator Fuel Tank Shutoff and Drain Control
320 GC, 320 and 323 Excavator Shovel Crane Control - If Equipped
320 GC, 320 and 323 Excavator Travel Control - Straight Travel Pedal (If Equipped)
320 GC, 320 and 323 Excavator Engine Starting
320 GC, 320 and 323 Excavator Cab Door
320 GC, 320 and 323 Excavator Engine and Machine Warm-Up
C12.9 Marine Engines Bearing Clearance - Check
XQ60 Rental Generator Set Control Panel
C7.1 Marine Propulsion Engine Rocker Shaft
C7.1 Marine Propulsion Engine Camshaft Bearings
C7.1 Marine Propulsion Engine Camshaft
3516C Locomotive Engine and Generator Set Overhaul (Major)
XQ60 Rental Generator Set Refill Capacities and Recommendations
New Heat Shields Are Used on Certain C175 Locomotive Engines {1067} New Heat Shields Are Used on Certain C175 Locomotive Engines {1067}
3512E Engines Muffler - Remove and Install
A New Prelube Pump Oil Tube Assembly Is Used on Certain 3516C Commercial Engines {1319} A New Prelube Pump Oil Tube Assembly Is Used on Certain 3516C Commercial Engines {1319}
Assembly Procedure For Aftercooler Bonnet Group On Certain G3500 and CG170-16 Engines {1063} Assembly Procedure For Aftercooler Bonnet Group On Certain G3500 and CG170-16 Engines {1063}
Use of the 370-8028 Integral Seal and the 394-0295 Integral Seal {1100} Use of the 370-8028 Integral Seal and the 394-0295 Integral Seal {1100}