A New Prelube Pump Oil Tube Assembly Is Used on Certain 3516C Commercial Engines {1319}
- Generator Set
- 3516C GEN SET (S/N: SBK1-UP)
- Marine Auxillary Engine
- 3516C (S/N: JTS1-UP; MXT1-UP; TKX1-UP)
- Marine Engine
- 3516C (S/N: DPD1-UP; PAG1-UP; PXJ1-UP; TTJ1-UP; TKT1-UP; TKY1-UP)
- 3516E (S/N: MR91-UP)
Description Of Change: The new oil tube assembly more resistant to fatigue.
Adaptable To: The new 492-4395 Oil Hose Assembly replaces the former 464-1833 Oil Tube As.
The new oil tube assembly is adaptable to the above engines back to first production.
This change is effective for the serial numbers listed in Table 1.
Show/hide table
| Effective Serial Numbers |
|---|
| S/N:TKT00244-UP |
| S/N:TKX00206-UP |
| S/N:TKY00360-UP |
| S/N:PAG00483-UP |
| S/N:JTS00564-UP |
| S/N:SBK02014-UP |
| S/N:TTJ00656-UP |
| S/N:DPD00206-UP |
| S/N:MXT00208-UP |
| S/N:PXJ00415-UP |
| S/N:MR900202-UP |
Caterpillar Information System:
3512E Engines Muffler - Remove and Install
New Heat Shields Are Used on Certain C175 Locomotive Engines {1067} New Heat Shields Are Used on Certain C175 Locomotive Engines {1067}
XQ60 Rental Generator Set Refill Capacities and Recommendations
3516C Locomotive Engine and Generator Set Overhaul (Major)
C7.1 Marine Propulsion Engine Camshaft
C7.1 Marine Propulsion Engine Camshaft Bearings
C7.1 Marine Propulsion Engine Rocker Shaft
XQ60 Rental Generator Set Control Panel
C12.9 Marine Engines Bearing Clearance - Check
C7.1 Marine Propulsion Engine Lifter Group
Procedure For Restoration of Flywheel Lockout {4480} Procedure For Restoration of Flywheel Lockout {4480}
320 GC, 320 and 323 Excavator Work Tool Control (Two-Way Flow) - If Equipped
Assembly Procedure For Aftercooler Bonnet Group On Certain G3500 and CG170-16 Engines {1063} Assembly Procedure For Aftercooler Bonnet Group On Certain G3500 and CG170-16 Engines {1063}
Use of the 370-8028 Integral Seal and the 394-0295 Integral Seal {1100} Use of the 370-8028 Integral Seal and the 394-0295 Integral Seal {1100}
G3512 Generator Set Engines Configuration Parameters
C12.9 Marine Engines Engine Oil Cooler - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor (Second Stage) - Remove and Install
XQ60 Rental Generator Set Cooling System Coolant Level - Check
C7.1 Marine Propulsion Engine Cylinder Head Valves
C7.1 Marine Propulsion Engine Cylinder Block
Selective Catalytic Reduction Retrofit Aftertreatment Aftertreatment Identification Module - Test
Selective Catalytic Reduction Retrofit Aftertreatment Sensor Supply - Test
3512E Engines Catalytic Converter - Remove and Install
Selective Catalytic Reduction Retrofit Aftertreatment Sensor Signal (Analog, Passive) - Test