Cylinder Block
Show/hide table
Illustration 1 | g06071196 |
Show/hide table
Illustration 2 | g06377865 |
Front view |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
1 | - | - | Cylinder bore is |
2 | - | - | Diameter of the bushing in the cylinder block for the number 1 camshaft bearing is Diameter of the bushing in the cylinder block for the number 2 camshaft bearing is Diameter of the bushing in the cylinder block for the number 3 camshaft bearing is Diameter of the bushing in the cylinder block for the number 4 camshaft bearing is |
3 | - | - | Bore in the cylinder block for the main bearings is |
4 | 1 | 232-1322 Plug | Torque to |
D1 | 1 | 370-6545 Camshaft Bushing | Installation depth is |
D2 | 1 | 232-7596 Plug | Installation depth is |
- | - | - | Ensure that the crankshaft can rotate freely. |
Caterpillar Information System:
C7.1 Marine Propulsion Engine Cylinder Head Valves
XQ60 Rental Generator Set Cooling System Coolant Level - Check
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor (Second Stage) - Remove and Install
C12.9 Marine Engines Engine Oil Cooler - Remove and Install
G3512 Generator Set Engines Configuration Parameters
Use of the 370-8028 Integral Seal and the 394-0295 Integral Seal {1100} Use of the 370-8028 Integral Seal and the 394-0295 Integral Seal {1100}
Assembly Procedure For Aftercooler Bonnet Group On Certain G3500 and CG170-16 Engines {1063} Assembly Procedure For Aftercooler Bonnet Group On Certain G3500 and CG170-16 Engines {1063}
A New Prelube Pump Oil Tube Assembly Is Used on Certain 3516C Commercial Engines {1319} A New Prelube Pump Oil Tube Assembly Is Used on Certain 3516C Commercial Engines {1319}
3512E Engines Muffler - Remove and Install
New Heat Shields Are Used on Certain C175 Locomotive Engines {1067} New Heat Shields Are Used on Certain C175 Locomotive Engines {1067}
XQ60 Rental Generator Set Refill Capacities and Recommendations
3516C Locomotive Engine and Generator Set Overhaul (Major)
Selective Catalytic Reduction Retrofit Aftertreatment Aftertreatment Identification Module - Test
Selective Catalytic Reduction Retrofit Aftertreatment Sensor Supply - Test
3512E Engines Catalytic Converter - Remove and Install
Selective Catalytic Reduction Retrofit Aftertreatment Sensor Signal (Analog, Passive) - Test
XQ60 Rental Generator Set Engine Oil and Filter - Change
XQ60 Rental Generator Set Stopping the Engine
XQ60 Rental Generator Set Fuel Tank Water and Sediment - Drain
3512E Engines Engine Oil Pressure Sensor - Remove and Install
C7.1 Marine Propulsion Engine Connecting Rod Bearing Journal
C7.1 Marine Propulsion Engine Main Bearing Journal
G3512 Generator Set Engines Coolant Pressure Is Low
C7.1 Marine Propulsion Engine Connecting Rod