Connecting Rod
Show/hide table
| |
| Illustration 1 | g06071728 |
Show/hide table
| Specifications for 331-0292 Connecting Rod Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| A | - | - | Diameter of the finished bore for the piston pin is |
| B | - | - | Distance between the parent bores is |
| C | - | - | Length of the connecting rod is |
| D | - | - | Diameter for the finished bore for the connecting rod bearing is |
For the correct procedure to install the bearing shell for the connecting rod, refer to Disassembly and Assembly, "Pistons and Connecting Rods - Assemble".
Caterpillar Information System:
G3512 Generator Set Engines Coolant Pressure Is Low
C7.1 Marine Propulsion Engine Main Bearing Journal
C7.1 Marine Propulsion Engine Connecting Rod Bearing Journal
3512E Engines Engine Oil Pressure Sensor - Remove and Install
XQ60 Rental Generator Set Fuel Tank Water and Sediment - Drain
XQ60 Rental Generator Set Stopping the Engine
XQ60 Rental Generator Set Engine Oil and Filter - Change
Selective Catalytic Reduction Retrofit Aftertreatment Sensor Signal (Analog, Passive) - Test
3512E Engines Catalytic Converter - Remove and Install
Selective Catalytic Reduction Retrofit Aftertreatment Sensor Supply - Test
Selective Catalytic Reduction Retrofit Aftertreatment Aftertreatment Identification Module - Test
C7.1 Marine Propulsion Engine Cylinder Block
C7.1 Marine Propulsion Engine Engine Support (Rear)
C7.1 Marine Propulsion Engine Fuel Lines
C7.1 Marine Propulsion Engine Belt Guard
3512E Engines Pressure Sensor (NRS Differential) - Remove and Install
C7.1 Marine Propulsion Engine Aftercooler
C7.1 Marine Propulsion Engine Heat Exchanger
C7.1 Marine Propulsion Engine Auxiliary Sea Water Pump
C7.1 Marine Propulsion Engine Engine Mounting
C7.1 Marine Propulsion Engine Fuel Cooler
3512E Engines Pressure Sensor (NRS Absolute) - Remove and Install
TR35 Railway Transmission Transmission Operation
3512E HD Petroleum Engine Configuration Parameters