Pressure Sensor (NRS Differential) - Remove and Install
- Remove bolts (1) and plate (2).
Show/hide table
Illustration 2 g06072168 - Disconnect harness assembly (3).
Show/hide table
Illustration 3 g06072200 - Remove bolts (4), bracket (5), and pressure sensor (NRS differential) (6).
Show/hide table
Illustration 1 | g06072147 |
- Install pressure sensor (NRS differential) (6) in the reverse order of removal.
- Tighten bolts (4) to a torque of
20 ± 2 N·m (177 ± 18 lb in) .
- Tighten bolts (4) to a torque of
Caterpillar Information System:
C7.1 Marine Propulsion Engine Belt Guard
C7.1 Marine Propulsion Engine Fuel Lines
C7.1 Marine Propulsion Engine Engine Support (Rear)
C7.1 Marine Propulsion Engine Connecting Rod
G3512 Generator Set Engines Coolant Pressure Is Low
C7.1 Marine Propulsion Engine Main Bearing Journal
C7.1 Marine Propulsion Engine Connecting Rod Bearing Journal
3512E Engines Engine Oil Pressure Sensor - Remove and Install
XQ60 Rental Generator Set Fuel Tank Water and Sediment - Drain
XQ60 Rental Generator Set Stopping the Engine
XQ60 Rental Generator Set Engine Oil and Filter - Change
Selective Catalytic Reduction Retrofit Aftertreatment Sensor Signal (Analog, Passive) - Test
C7.1 Marine Propulsion Engine Aftercooler
C7.1 Marine Propulsion Engine Heat Exchanger
C7.1 Marine Propulsion Engine Auxiliary Sea Water Pump
C7.1 Marine Propulsion Engine Engine Mounting
C7.1 Marine Propulsion Engine Fuel Cooler
3512E Engines Pressure Sensor (NRS Absolute) - Remove and Install
TR35 Railway Transmission Transmission Operation
3512E HD Petroleum Engine Configuration Parameters
® Grade & Slope for Cold Planers System Components
Selective Catalytic Reduction Retrofit Aftertreatment SCR Catalyst Sulfation Is Excessive
3512E Engines Crankcase Pressure Sensor - Remove and Install
TR35 Locomotive Transmission Transmission Oil Pump - Remove and Install