Transmission Oil Pump - Remove and Install
Show/hide table
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
Show/hide table
Personal injury can result from hot oil spray and raised work tools. Make sure all the work tools have been lowered, the oil is cool and the pressure has been released from the hydraulic system before removing any components or lines. Do not allow hot oil or components to contact skin. |
- Drain transmission oil into a suitable container.
Show/hide table
Illustration 1 g06072541 - Remove bolts (1) and disconnect hose assembly (2).
- Remove bolts (5) and disconnect hose assembly (6).
Note: Remove the spacer flange with hose assembly (6).
- Attach a suitable lifting device to the transmission charge pump (4). The weight of transmission charge pump (4) is approximately
29.7 kg (65.5 lb) . Remove nuts (3). Remove transmission charge pump (4).
- Install transmission charge pump (4) in the reverse order of removal.
- Install nuts (3). Torque nuts (3) to
227 ± 10 N·m (167.5 ± 7.5 lb ft) .
- Install nuts (3). Torque nuts (3) to
Caterpillar Information System:
3512E Engines Crankcase Pressure Sensor - Remove and Install
Selective Catalytic Reduction Retrofit Aftertreatment SCR Catalyst Sulfation Is Excessive
® Grade & Slope for Cold Planers System Components
3512E HD Petroleum Engine Configuration Parameters
TR35 Railway Transmission Transmission Operation
3512E Engines Pressure Sensor (NRS Absolute) - Remove and Install
C7.1 Marine Propulsion Engine Fuel Cooler
C7.1 Marine Propulsion Engine Engine Mounting
C7.1 Marine Propulsion Engine Auxiliary Sea Water Pump
C7.1 Marine Propulsion Engine Heat Exchanger
C7.1 Marine Propulsion Engine Aftercooler
3512E Engines Pressure Sensor (NRS Differential) - Remove and Install
3512E Land Electric Drive Coolant Sample (Level 1) - Obtain
G3512 Generator Set Engines Electronic Control System Parameters - Configuration Parameters
3512E HD Petroleum Engine Coolant Sample (Level 2) - Obtain
3512E HD Petroleum Engine Engine Oil Sample - Obtain
TR35 Locomotive Transmission Transmission Oil Filter Base - Remove and Install
797F and 797F XQ Off-Highway Truck TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565} 797F and 797F XQ Off-Highway Truck TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565}
Installation of Cold Climate Kit for C2.2 Engines {1071, 1090} Installation of Cold Climate Kit for C2.2 Engines {1071, 1090}
3512E Land Electric Drive Fuel Filter Differential Pressure - Check
3512E HD Petroleum Engine Engine Rating Definitions
3512E Engines Atmospheric Pressure Sensor - Remove and Install
A New Expansion Tank Assembly Is Now Used On Certain 3516B Marine Engines {1354} A New Expansion Tank Assembly Is Now Used On Certain 3516B Marine Engines {1354}
TR35 Locomotive Transmission Relief Valve (Transmission Hydraulic Control) - Remove and Install