Transmission Oil Filter Base - Remove and Install
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- For access to a video of this procedure, scan the QR code with a QR enabled device, or copy the link below
Show/hide table
Table 1 Caterpillar Channel 1 Media Number: CATU0901 Title: Transmission Oil Filter Base - Remove and Install Channel 1 URL: https://channel1.mediaspace.kaltura.com/media/Transmission+Oil+Filter+Base+-+Remove+and+Install/0_uza5j3df - Refer to Operation and Maintenance Manual, "Transmission Oil Filter - Change" for the correct removing and installing of the oil filter.
Show/hide table
Illustration 2 g06072747 - Disconnect hose assemblies (1) and (2).
Show/hide table
Illustration 3 g06072754 - Remove bolts (6) and remove transmission oil filter base (7).
Show/hide table
Illustration 1 | g06250160 |
- Install transmission oil filter base (4) in the reverse order of removal.
Caterpillar Information System:
3512E HD Petroleum Engine Engine Oil Sample - Obtain
3512E HD Petroleum Engine Coolant Sample (Level 2) - Obtain
G3512 Generator Set Engines Electronic Control System Parameters - Configuration Parameters
3512E Land Electric Drive Coolant Sample (Level 1) - Obtain
TR35 Locomotive Transmission Transmission Oil Pump - Remove and Install
3512E Engines Crankcase Pressure Sensor - Remove and Install
Selective Catalytic Reduction Retrofit Aftertreatment SCR Catalyst Sulfation Is Excessive
® Grade & Slope for Cold Planers System Components
3512E HD Petroleum Engine Configuration Parameters
TR35 Railway Transmission Transmission Operation
3512E Engines Pressure Sensor (NRS Absolute) - Remove and Install
C7.1 Marine Propulsion Engine Fuel Cooler
797F and 797F XQ Off-Highway Truck TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565} 797F and 797F XQ Off-Highway Truck TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565}
Installation of Cold Climate Kit for C2.2 Engines {1071, 1090} Installation of Cold Climate Kit for C2.2 Engines {1071, 1090}
3512E Land Electric Drive Fuel Filter Differential Pressure - Check
3512E HD Petroleum Engine Engine Rating Definitions
3512E Engines Atmospheric Pressure Sensor - Remove and Install
A New Expansion Tank Assembly Is Now Used On Certain 3516B Marine Engines {1354} A New Expansion Tank Assembly Is Now Used On Certain 3516B Marine Engines {1354}
TR35 Locomotive Transmission Relief Valve (Transmission Hydraulic Control) - Remove and Install
TR35 Locomotive Transmission Modulating Valve (Transmission Clutch) - Remove and Install
C12.9 Marine Engines Engine Oil Pan - Remove and Install
TR35 Railway Transmission Calibrations
C12.9 Marine Engines Engine Oil Pump - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks Data Link - Test