Pressure Sensor (NRS Absolute) - Remove and Install
- Remove bolts (1) and plate (2).
Show/hide table
Illustration 2 g06072422 - Remove straps (4) and position heat shield tube (3) out of the way.
Show/hide table
Illustration 3 g06072424 - Disconnect harness assembly (5) and remove pressure sensor (NRS absolute) (6).
- Remove the O-ring seal from pressure sensor (NRS absolute) (6) and discard.
Show/hide table
| |
| Illustration 1 | g06072147 |
- Install pressure sensor (NRS absolute) (6) in the reverse order of removal.
- Lubricate a new O-ring seal with clean engine oil. Install new O-ring seal onto pressure sensor (NRS absolute) (6).
- Tighten pressure sensor (NRS absolute) (6) to a torque of
10 ± 2 N·m (89 ± 18 lb in) .
Caterpillar Information System:
C7.1 Marine Propulsion Engine Fuel Cooler
C7.1 Marine Propulsion Engine Engine Mounting
C7.1 Marine Propulsion Engine Auxiliary Sea Water Pump
C7.1 Marine Propulsion Engine Heat Exchanger
C7.1 Marine Propulsion Engine Aftercooler
3512E Engines Pressure Sensor (NRS Differential) - Remove and Install
C7.1 Marine Propulsion Engine Belt Guard
C7.1 Marine Propulsion Engine Fuel Lines
C7.1 Marine Propulsion Engine Engine Support (Rear)
C7.1 Marine Propulsion Engine Connecting Rod
G3512 Generator Set Engines Coolant Pressure Is Low
C7.1 Marine Propulsion Engine Main Bearing Journal
TR35 Railway Transmission Transmission Operation
3512E HD Petroleum Engine Configuration Parameters
® Grade & Slope for Cold Planers System Components
Selective Catalytic Reduction Retrofit Aftertreatment SCR Catalyst Sulfation Is Excessive
3512E Engines Crankcase Pressure Sensor - Remove and Install
TR35 Locomotive Transmission Transmission Oil Pump - Remove and Install
3512E Land Electric Drive Coolant Sample (Level 1) - Obtain
G3512 Generator Set Engines Electronic Control System Parameters - Configuration Parameters
3512E HD Petroleum Engine Coolant Sample (Level 2) - Obtain
3512E HD Petroleum Engine Engine Oil Sample - Obtain
TR35 Locomotive Transmission Transmission Oil Filter Base - Remove and Install
797F and 797F XQ Off-Highway Truck TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565} 797F and 797F XQ Off-Highway Truck TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565}