C-16 and 3456Cylinder Packs, Short Blocks, and Long Blocks May Have Oversize Piston Skirts{1225} Caterpillar


C-16 and 3456Cylinder Packs, Short Blocks, and Long Blocks May Have Oversize Piston Skirts{1225}

Usage:

3406E 1MM
Agricultural Tractor:
MT865 (S/N: BDS1-UP; GDA1-UP)
MTC865 (S/N: 8191-UP)
Landfill Compactor:
836G (S/N: BRL1-UP; 7MZ1-UP)
Engine:
3406E (S/N: 1MM1-UP)
C-15 (S/N: 6NZ1-UP)
C-16 (S/N: W1A1-UP; 7CZ1-UP)
Generator Set:
3456 GEN SET (S/N: CCB1-UP; EPE1-UP; C1G1-UP; C3G1-UP; C4G1-UP; DPG1-UP; CAH1-UP; GHJ1-UP; C2T1-UP; CBX1-UP; 9BZ1-UP)
Industrial Engine:
C-16 IND (S/N: BFM1-UP)
Truck Engines:
C16 (S/N: G1D1-UP)
Excavator:
385B (S/N: MYA1-UP; RCD1-UP; BKF1-UP; FDL1-UP; ANS1-UP; CLS1-UP; BKX1-UP; BLY1-UP)
5090B (S/N: CLD1-UP; SJY1-UP)
Power Module:
PM3456 (S/N: B3G1-UP)
Underground Articulated Truck:
AD55 (S/N: ANW1-UP)
Wheel Dozer:
834G (S/N: BPC1-UP; 6GZ1-UP)
Wheel Loader:
988G (S/N: BNH1-UP; 2TW1-UP)
Wheel Tractor-Scraper:
650B (S/N: 58K1-UP)
651B (S/N: 67K1-UP)
657B (S/N: 68K1-UP)
660B (S/N: 58K1-UP)

Introduction

Cylinder packs, short blocks, long blocks, engine rebuild kits, and remanufactured engines could have been built with oversize 284-6039 Piston Skirts . The solution below is the recommended repair for this issue.

Problem




Illustration 1g03583079

(1) Date Code

Cylinder packs, short blocks, long blocks, engine rebuild kits, and remanufactured engines could have been built with oversize 284-6039 Piston Skirts . A process problem has been identified and the date codes for the suspect piston skirts are U182 and U183.

Solution

Remove the piston skirts with date codes U182 and U183 from dealer stock. Replace the skirts in cylinder packs, short blocks, long blocks, engine rebuild kits, engines and inventory that are found to contain skirts with these date codes. Use existing parts with other date codes to repair. A parts stock service letter will be created to pay for this work.

Table 1
Affected Part Numbers    
0R-9393    
0R-8918    
0R-4767    
10R-1506    
10R-8606    
10R-7271    
10R-7272    
10R-9344    
10R-9348    

Caterpillar Information System:

C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Flywheel and Ring Gear - Remove and Install
C15 and C18 Tier 4 Final Engines Aftertreatment SCR System Dosing - Test
Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N} Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}
C280-08 Tier 4 Engine Vibration Damper - Remove and Install
C280-08 Tier 4 Engine Priority Valve - Assemble
C280-08 Tier 4 Engine Priority Valve - Disassemble
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Priority Valve - Remove and Install
C280-08 Tier 4 Engine Oil Temperature Regulators - Remove and Install
C280-08 Tier 4 Engine Engine Oil Pan - Assemble
C280-08 Tier 4 Engine Engine Oil Pan - Disassemble
C280-08 Tier 4 Engine Engine Oil Pan - Remove and Install
374F and 390F Excavators Tool Control System One-Way/Two Pump - Electric Control: Relief Valve (Line) - Test and Adjust
C280-08 Tier 4 Engine Crankshaft Front Seal - Remove and Install
C280-08 Tier 4 Engine Crankshaft Rear Seal - Remove and Install
C280-08 Tier 4 Engine Crankshaft Front Gear - Remove and Install
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Crankshaft Rear Gear - Remove and Install
C280-08 Tier 4 Engine Camshaft Drive Gear - Remove
C280-08 Tier 4 Engine Camshaft Drive Gear - Install
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Idler Gears (Rear) - Remove
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Idler Gears (Rear) - Install
C280-08 Tier 4 Engine Idler Gears (Front) - Remove
C280-08 Tier 4 Engine Idler Gears (Front) - Install
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Housing (Front) - Remove and Install
G3600 A4 Engines Connecting Rod Bearings - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.