Crankshaft Rear Gear - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 8T-0914(1) | Guide Pin | 2 |
Show/hide table
| (1) | Part of 9U-5105 Engine Tool Group |
Start By:
- Remove the crankshaft rear seal.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install Tooling (A) in the rear of the crankshaft.
- Attach a suitable lifting device to crankshaft rear gear (1). The weight of crankshaft rear gear (1) is approximately
65 kg (143 lb) . Slide crankshaft rear gear (1) onto Tooling (A). Remove crankshaft rear gear (1). - Remove the O-ring seals from each side of crankshaft rear gear (1).
Show/hide table
| |
| Illustration 1 | g01294603 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install crankshaft rear gear (1) in the reverse order of removal.
- Align the four unevenly spaced holes in crankshaft rear gear (1) with the four threaded holes in the crankshaft.
- Install crankshaft rear gear (1) on Tooling (A) with the gear teeth away from the crankshaft.
Caterpillar Information System:
C280-08 Tier 4 Engine Crankshaft Front Gear - Remove and Install
C280-08 Tier 4 Engine Crankshaft Rear Seal - Remove and Install
C280-08 Tier 4 Engine Crankshaft Front Seal - Remove and Install
C-16 and 3456Cylinder Packs, Short Blocks, and Long Blocks May Have Oversize Piston Skirts{1225} C-16 and 3456Cylinder Packs, Short Blocks, and Long Blocks May Have Oversize Piston Skirts{1225}
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Flywheel and Ring Gear - Remove and Install
C15 and C18 Tier 4 Final Engines Aftertreatment SCR System Dosing - Test
Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N} Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}
C280-08 Tier 4 Engine Vibration Damper - Remove and Install
C280-08 Tier 4 Engine Priority Valve - Assemble
C280-08 Tier 4 Engine Priority Valve - Disassemble
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Priority Valve - Remove and Install
C280-08 Tier 4 Engine Oil Temperature Regulators - Remove and Install
C280-08 Tier 4 Engine Camshaft Drive Gear - Remove
C280-08 Tier 4 Engine Camshaft Drive Gear - Install
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Idler Gears (Rear) - Remove
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Idler Gears (Rear) - Install
C280-08 Tier 4 Engine Idler Gears (Front) - Remove
C280-08 Tier 4 Engine Idler Gears (Front) - Install
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Housing (Front) - Remove and Install
G3600 A4 Engines Connecting Rod Bearings - Inspect
Well Stimulation Pumps Maintenance Interval Schedule
3516C Marine Engine Maintenance Recommendations
140 Motor Graders Air Cleaner
140 Motor Graders Air Lines