2012/10/04 Caterpillar


An Improved Hand Operated Fuel Priming Pump Is Available for Certain Truck Engines {1258}

Usage:

C-12 8YF
Engine:
C-12 (S/N: R1D1-UP; 8YF1-UP)
C-15 (S/N: 9NZ1-UP)
C13 (S/N: JAM1-UP)
C15 (S/N: NXS1-UP; RKS1-UP)
Truck Engines:
C16 (S/N: G1D1-UP)
Truck Engine News SEBD6870, 04 October 2012, "An Improved Hand Operated Fuel Priming Pump Is Available for Certain Truck Engines ". Disregard the previous article. The text has been removed.

Caterpillar Information System:

2012/10/11 An Improved Hand Operated Fuel Priming Pump Is Available for Certain Industrial Engines {1258}
2012/10/04 An Improved Hand Operated Fuel Priming Pump Is Available {1258}
C18 Marine Engine Belts - Inspect/Replace
C280 Marine and Petroleum Engines ECM Software - Install
C1.5 and C2.2 Industrial Engines Throttle Setup
3516C Locomotive Engine and Generator Set Flexible Coupling - Inspect - If Equipped
C1.5 and C2.2 Engines for Caterpillar Built Machines Programming Parameters
C175-16 Engine Intake Manifold Air Temperature Is High
2012/11/09 New Jacket Water Heater System Components are Used on Certain G3412 Engines {1383}
3512E Tier 4 Final Engines for Land Electric Drilling Jacket Water Heater
C175-16 Engine Intake Manifold Air Pressure Is Low
C175-16 Engine Intake Manifold Air Pressure Is High
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223} Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
C175-16 Engine Oil Filter Differential Pressure Problem
C175-16 Engine Oil Pressure Is Low
C175-16 Engine Oil Temperature Is High
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Operator Control Switch (Switch to Ground) - Test
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 0674 - FMI 08
C175-16 Engine Prelubrication Pump Problem
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Normal Operation
C175-16 Engine Turbocharger Turbine Temperature Is High
C1.5 and C2.2 Industrial Engines Multiposition Switch Setup
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562} Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
C2.6 and C3.3B Engines for Caterpillar Built Machines Alternator and Regulator
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.