C1.5 and C2.2 Engines for Caterpillar Built Machines Caterpillar


Programming Parameters

Usage:

CB-22B 2B2
The electronic service tool can be used to view certain parameters that can affect the operation of the engine. The electronic service tool can also be used to change certain parameters. The parameters are stored in the Electronic Control Module (ECM). Parameters that can be changed have a tattletale number. The tattletale number is incremented whenever a parameter is changed.

Caterpillar Information System:

C175-16 Engine Intake Manifold Air Temperature Is High
2012/11/09 New Jacket Water Heater System Components are Used on Certain G3412 Engines {1383}
3512E Tier 4 Final Engines for Land Electric Drilling Jacket Water Heater
C175-16 Engine Intake Manifold Air Pressure Is Low
C175-16 Engine Intake Manifold Air Pressure Is High
2013/08/26 New Software Is Used on Certain Tier 3 Machine Engines {1901, 1920, 7620}
C18 Marine Engines Cat Data Link - Test
3516C Locomotive Engine and Generator Set Refill Capacities
C175-16 Engine Inlet Air Is Restricted
3516C Locomotive Engine Aftercooler Core - Inspect/Clean/Test
Cat Water Delivery System (WDS) Safety Messages
3500C Locomotive Engines Fuel Filter Differential Pressure - Check
3516C Locomotive Engine and Generator Set Flexible Coupling - Inspect - If Equipped
C1.5 and C2.2 Industrial Engines Throttle Setup
C280 Marine and Petroleum Engines ECM Software - Install
C18 Marine Engine Belts - Inspect/Replace
2012/10/04 An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/11 An Improved Hand Operated Fuel Priming Pump Is Available for Certain Industrial Engines {1258}
2012/10/04 An Improved Hand Operated Fuel Priming Pump Is Available for Certain Truck Engines {1258}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223} Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
C175-16 Engine Oil Filter Differential Pressure Problem
C175-16 Engine Oil Pressure Is Low
C175-16 Engine Oil Temperature Is High
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Operator Control Switch (Switch to Ground) - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.