Crankshaft Seals
Show/hide table
Illustration 1 | g03167997 |
(2) Front face of cylinder block
(5) Sleeve |
Show/hide table
Specification for 7E-9610 Crankshaft Seal Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 6V-5059 O-Ring Seal | Before assembly, lightly lubricate the bore that is being sealed. |
3 | 1 | 190-2463 Seal As | Standard rotation engine will have crankshaft seals on the rear of the engine.
Reverse rotation engine will have crankshaft seals on the front of the engine. |
4 | 1 | 190-2462 Seal As | Standard rotation engine will have crankshaft seals on the front of the engine.
Reverse rotation engine will have crankshaft seals on the rear of the engine. |
6 | 1 | 106-2033 Crankshaft Adapter | Before assembly, apply Chemtool Alpha 2000 Calcium Complex Grease to the bore to avoid moisture penetration causing corrosion. |
7 | 2 | 160-8173 Wear Sleeve | Before assembly, apply green Loctite 620 to inner diameter of the sleeve.
Position the sleeves on the adapters. Make sure that the arrow on the outside diameter of the sleeve is pointing in the direction of the rotation of the crankshaft. Assemble the sleeve onto the adapter. Make sure that the adapter bottoms out against the shoulder. |
Caterpillar Information System:
2012/12/11 New Software is Used on C175-16 Generator Set Engines {1901, 1920}
2012/08/23 Kits Are Available for Repair of Exhaust Components on Certain 3516 Electric Power Engines with Center-Mounted Exhaust Systems {1052, 1053, 1059, 1061, 1071}
C32 Marine Engines Vibration Damper - Check
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Determining Diagnostic Trouble Codes
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
C32 Marine Engines Engine Oil Pressure - Test
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Cooling Fan Control - Test
C32 Marine Engines Fuel System Pressure - Test
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Connector Contact Description
C280 Marine and Petroleum Engines Prelubrication Pump Problem
C13-XQ350 Rental Generator Set Product Lifting
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Oil Level Is Low
C27 and C32 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS)
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electrical Connector - Inspect
C18 Generator set and C18 Marine Engines Engine Oil Pump - Remove
3516B Engine Alternator - Remove and Install
C18 Marine Auxiliary and Marine Generator Set Engines Engine Overspeeds
3516B Engine Electronic Control Module (Engine) - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Engine Monitoring System
C18 Marine Auxiliary and Marine Generator Set Engines Engine Top Speed Is Not Obtained
C280 Marine and Petroleum Engines Engine Cranks but Does Not Start
3516B Engine Fuel Transfer Pump - Disassemble
3516B Engine Fuel Transfer Pump - Assemble