C27 and C32 Engines for Caterpillar Built Machines Caterpillar


Electronic Unit Injector Mechanism

Usage:

992K 880


Illustration 1g03148716

Table 1
Specification for 348-8924 Fuel Injection Pump Gp and 348-8925 Fuel Injection Pump Gp 
Item  Qty  Part  Specification Description 
12  8S-9191 Bolt  Torque to 55 ± 10 N·m (41 ± 7 lb ft)
Before installation of the unit injector, lubricate the bore of the O-ring seals with a 50/50 mixture of clean engine oil and green 8T-2998 Lubricant. 

Caterpillar Information System:

C27 and C32 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS)
C280-16 Petroleum Engine Crankshaft Seals
2012/12/11 New Software is Used on C175-16 Generator Set Engines {1901, 1920}
2012/08/23 Kits Are Available for Repair of Exhaust Components on Certain 3516 Electric Power Engines with Center-Mounted Exhaust Systems {1052, 1053, 1059, 1061, 1071}
C32 Marine Engines Vibration Damper - Check
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Determining Diagnostic Trouble Codes
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
C32 Marine Engines Engine Oil Pressure - Test
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Cooling Fan Control - Test
C32 Marine Engines Fuel System Pressure - Test
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Connector Contact Description
C280 Marine and Petroleum Engines Prelubrication Pump Problem
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electrical Connector - Inspect
C18 Generator set and C18 Marine Engines Engine Oil Pump - Remove
3516B Engine Alternator - Remove and Install
C18 Marine Auxiliary and Marine Generator Set Engines Engine Overspeeds
3516B Engine Electronic Control Module (Engine) - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Engine Monitoring System
C18 Marine Auxiliary and Marine Generator Set Engines Engine Top Speed Is Not Obtained
C280 Marine and Petroleum Engines Engine Cranks but Does Not Start
3516B Engine Fuel Transfer Pump - Disassemble
3516B Engine Fuel Transfer Pump - Assemble
2013/05/23 A New Gas Shutoff Valve (GSOV) Is Used for G3516B and G3520B Engines {1270, 5479}
784C and 785C Off-Highway Trucks Machine Systems Duo-Cone Seals - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.