Alternator - Remove and Install
- Turn the battery disconnect switch to the OFF position.
- Remove the belt from the alternator pulley. Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
Show/hide table
Illustration 1 g02573956 - Remove guard (1). Loosen nuts (2).
- Disconnect harness assemblies (3).
- Remove bolts (4). Remove alternator (5).
- Repeat Steps 1 and 5 for the remaining alternator.
- Position alternator (5). Install bolts (4).
- Install harness assemblies (3).
- Tighten nuts (2).Install guard (1).
- Install the belt onto the alternator pulley. Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
- Turn the battery disconnect switch to the ON position.
- Repeat Steps 1 and 5 for the remaining alternator.
Show/hide table
Illustration 2 | g02573956 |
Caterpillar Information System:
C18 Generator set and C18 Marine Engines Engine Oil Pump - Remove
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electrical Connector - Inspect
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
C27 and C32 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS)
C280-16 Petroleum Engine Crankshaft Seals
2012/12/11 New Software is Used on C175-16 Generator Set Engines {1901, 1920}
2012/08/23 Kits Are Available for Repair of Exhaust Components on Certain 3516 Electric Power Engines with Center-Mounted Exhaust Systems {1052, 1053, 1059, 1061, 1071}
C32 Marine Engines Vibration Damper - Check
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Determining Diagnostic Trouble Codes
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
C32 Marine Engines Engine Oil Pressure - Test
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Cooling Fan Control - Test
C18 Marine Auxiliary and Marine Generator Set Engines Engine Overspeeds
3516B Engine Electronic Control Module (Engine) - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Engine Monitoring System
C18 Marine Auxiliary and Marine Generator Set Engines Engine Top Speed Is Not Obtained
C280 Marine and Petroleum Engines Engine Cranks but Does Not Start
3516B Engine Fuel Transfer Pump - Disassemble
3516B Engine Fuel Transfer Pump - Assemble
2013/05/23 A New Gas Shutoff Valve (GSOV) Is Used for G3516B and G3520B Engines {1270, 5479}
784C and 785C Off-Highway Trucks Machine Systems Duo-Cone Seals - Install
G3600 Engines Water Pump
C27 and C32 Tier 4 Engines Exhaust Manifold
Software On Certain C9 Industrial Engines May Cause Engine Speed Instability or the Inability to Achieve Full Load{1000, 1920} Software On Certain C9 Industrial Engines May Cause Engine Speed Instability or the Inability to Achieve Full Load{1000, 1920}