Engine Oil Pump - Remove
Start By:
- Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Remove oil supply tube assembly (1). Remove suction bell and tube assembly (4) and support bracket (5).
- Remove bolts (2) and remove engine oil pump (3) from the cylinder block.
Show/hide table
Illustration 1 | g03149363 |
Caterpillar Information System:
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electrical Connector - Inspect
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
C27 and C32 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS)
C280-16 Petroleum Engine Crankshaft Seals
2012/12/11 New Software is Used on C175-16 Generator Set Engines {1901, 1920}
2012/08/23 Kits Are Available for Repair of Exhaust Components on Certain 3516 Electric Power Engines with Center-Mounted Exhaust Systems {1052, 1053, 1059, 1061, 1071}
C32 Marine Engines Vibration Damper - Check
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Determining Diagnostic Trouble Codes
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
C32 Marine Engines Engine Oil Pressure - Test
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Cooling Fan Control - Test
C32 Marine Engines Fuel System Pressure - Test
3516B Engine Alternator - Remove and Install
C18 Marine Auxiliary and Marine Generator Set Engines Engine Overspeeds
3516B Engine Electronic Control Module (Engine) - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Engine Monitoring System
C18 Marine Auxiliary and Marine Generator Set Engines Engine Top Speed Is Not Obtained
C280 Marine and Petroleum Engines Engine Cranks but Does Not Start
3516B Engine Fuel Transfer Pump - Disassemble
3516B Engine Fuel Transfer Pump - Assemble
2013/05/23 A New Gas Shutoff Valve (GSOV) Is Used for G3516B and G3520B Engines {1270, 5479}
784C and 785C Off-Highway Trucks Machine Systems Duo-Cone Seals - Install
G3600 Engines Water Pump
C27 and C32 Tier 4 Engines Exhaust Manifold