Some removals require lifting fixtures in order to obtain proper balance. Lifting fixtures also help to provide safety.
Lifting eyes are designed and installed for each package. Alterations to the lifting eyes and/or the package make the lifting eyes and the lifting fixtures obsolete. If alterations are made, ensure that proper lifting devices are provided. Consult your Caterpillar dealer for information regarding fixtures for proper lifting.
The power module may be lifted by a crane from one position to another position. Two cranes are recommended in order to lift the power module. Using two cranes will reduce unnecessary stress on the power module. The recommended height for the hook is
| |
| Illustration 1 | g00728446 |
| |
| Illustration 2 | g03146832 |
| NOTICE |
|---|
|
Never bend the eyebolts and the brackets. Only load the eyebolts and the brackets under tension. Remember that the capacity of an eyebolt is less as the angle between the supporting members and the object becomes less than 90 degrees. When it is necessary to remove a component at an angle, only use a link bracket that is properly rated for the weight. |
Do NOT use the engine lifting eyes or the generator lifting eyes to lift the entire package. Lifting points (3) have been provided on the base rails of the generator set for lifting the entire package. However, lifting the engine and the generator together requires special equipment and procedures. Consult your Caterpillar dealer for information regarding fixtures for the proper lifting of your complete package.
To remove the engine ONLY, use lifting eyes (2) that are on the engine.
Note: The control panel and the terminal box will need to be removed before attempting to lift the generator.
To remove the generator ONLY, use lifting eyes (1) that are on the generator.