Housing (Front)
Show/hide table
Illustration 1 | g03353667 |
Show/hide table
Specification for 1W-0023 Front Housing Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 9S-8005 O-Ring Plug | Before assembly, lightly lubricate the bore with engine oil. |
2 | 3 | 6V-5049 O-Ring Seal | Before assembly, lightly lubricate the bore with engine oil. |
3 | 1 | 7C-1897 Speed Sensor Gp | Use the following procedure to tighten the engine speed sensor: 1. Before assembly, apply white Loctite 594 to threads. 2. Install the engine speed sensor into the 5/8 threaded hole and turn until the magnetic core contact with a tooth of the flywheel ring gear. 3. Back out 180 degrees and tighten the locknut. 4. Tighten the locknut to 5. The clearance between the engine speed sensor and the flywheel ring gear is |
4 | 4 | 1W-0104 Hollow Dowel | Extension (F) after installation is |
5 | 4 | 1W-0104 Hollow Dowel | Extension (H) after installation is |
6 | 4 | 7N-2043 Dowel | Extension (G) after installation is |
7 | 1 | 8L-2786 O-Ring Seal | Before assembly, lightly lubricate the bore with engine oil. |
8 | 1 | 6V-3833 O-Ring Seal | Before assembly, lightly lubricate the bore with engine oil. |
9 | 1 | 3P-0655 O-Ring Seal | Before assembly, lightly lubricate the bore with engine oil. |
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
2012/09/13 A New O-Ring for the Oil Filler Cap Is Used on C175-16 Engines {1107, 7555}
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Intake Manifold Air Pressure Is Low
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Sensor Signal (Analog, Active) - Test
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Crankcase Pressure Is High
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Oil Filter Differential Pressure Problem
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Oil Pressure Is Low
C280 Marine and Petroleum Engines Exhaust Temperature Is Low
C280 Marine and Petroleum Engines Exhaust Temperature Is High
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Coolant Pressure Is Low
C18 Marine Auxiliary and Marine Generator Set Engines Engine Cranks but Does Not Start
C280 Marine and Petroleum Engines Secondary ECM Assumes Control
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Sensor Signal (PWM) - Test
C13-XQ350 Rental Generator Set Plate Locations and Film Locations
C18 Marine Auxiliary and Marine Generator Set Engines Engine Has Mechanical Noise (Knock)
Health Interface Module Configuration and Operation Guide for Certain Trucks Equipped with a Non-Cat Tire Monitoring System {7605} Health Interface Module Configuration and Operation Guide for Certain Trucks Equipped with a Non-Cat Tire Monitoring System {7605}
C18 Marine Auxiliary and Marine Generator Set Engines Engine Misfires, Runs Rough or Is Unstable
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Oil Level Is Low
C13-XQ350 Rental Generator Set Product Lifting
C280 Marine and Petroleum Engines Prelubrication Pump Problem
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Connector Contact Description
C32 Marine Engines Fuel System Pressure - Test
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Cooling Fan Control - Test
C32 Marine Engines Engine Oil Pressure - Test